Search results

  1. S

    swapping harnesses

    well i swapped the harnesses out today and the only thing that didnt plug up was the sensor for the IAB. (right side of manifold) thats cuz there wasnt no plug for it on the ex harness. the only plugs i had to extend were the intake air temp. sensor, vtec and oil pressure. other than that...
  2. S

    swapping harnesses

    well i'm about to swap em out so we'll see how it goes. thanks for your help! Sal
  3. S

    anyone know the B16B tranny code?

    smooth_criminal is correct. i have a b16b tranny and it does infact have a R4 LSD stamp on it. good luck! Sal
  4. S

    b16a1 in a 95 civic dx

    which side is short? one axle goes into the tranny and the other goes into the intermediate shaft.
  5. S

    swapping harnesses

    its a 95 civic coupe dx with a 95 gsr motor and harness. oh yeah i'm using a p28 chipped ecu right now. everything but the a/c is working fine, i just wanted to make sure the ex harness would plug up just like the gsr harness w/o any problems. thanks, Sal
  6. S

    swapping harnesses

    i have a obd1 gsr harness right now that is cut and messed up so i'm looking to replace it. my questions are, will i run into any problems using a obd1 ex harness? will it just plug up exactly like the obd1 gsr harness? i know i'm going to have to swap over the wires that i ran for vtec, oil...
  7. S

    gsr compressor on a 95 dx?

    well today i swapped in my spare gsr compressor and charged the system but my air is still not coming out cold. a/c doesnt seem to be kicking on for some reason and this is where i get lost. what could be the problem if the system has oil and freon? i checked the a/c t-stat behind the glove box...
  8. S

    how to test a distributor

    then whats wrong with my motor? https://hondaswap.com/forums/index.php?showtopic=37558
  9. S

    how to test a distributor

    i already did that. working fine with spark going to all 4 cylinders. i just wanted to check the actual dizzy to make sur eits not fried or anything. thanks, Sal
  10. S

    how to test a distributor

    can anyone help me and tell me how to test my obd1 gsr distributor to make sure everything is fine before i change it out for a new one? please? thanks, Sal
  11. S

    gsr is hesitating and bogging

    thats what i was thinking of doing just to see if it works. if not then i'll tackle the fuel filter and pcv valve after that. anyone else? thanks, Sal
  12. S

    gsr is hesitating and bogging

    just yesterday when the i took the car out for a drive i noticed that it was idling like crap and i could barely get it out off the driveway. once i did it started to hesitate, bog and putter all at once. a lil bit of everything. i checked the harness, spark plugs and cap, nothing was wrong. so...
  13. S

    F/S: Rota Circuit 8 "Bronze"

    thanks alot for taking the time to actually weigh them. i appreciate that! even though i dont have the cash, would you take $450 shipped if i offered that? thanks, Sal
  14. S

    F/S: Rota Circuit 8 "Bronze"

    how much do they weigh? thanks, Sal
  15. S

    CKF Sensor (Crankshaft Speed Fluctuation) ?

    its throwing this code after installing a 99 b18c1 swap into a 98 dx hatch. my question is, where is this sensor located? would it be the same as the crank angle sensor? any help is greatly appreciated. thanks, Sal
  16. S

    obd1 gsr secondary butterflies

    let me check that. thanks, Sal
  17. S

    obd1 gsr secondary butterflies

    i just need help finding the pink/blue wire for the secondary butterflies, i ran the vtec solenoid, vtec oil pressure and knock sensor wires with no problems but cant seem to find the (iab) wire. is it located on the driver side harness? any help is greatly appreciated. thanks, Sal
  18. Try your Search on Google

Back
Top