Search results

  1. EG93sir

    LS/vtec bad idle surge! please help

    I had a similar problem with my ls/v,turned out to be my timing was a little advanced,and my TPS voltage was higher than .4 volts at closed throttle.I removed the throttle body and removed the factory screws from the tps,found some 8 mm headed bolts to go back in,adjusted the tps while the...
  2. EG93sir

    how can i get more power

    The GSR head swap is easier than the B16 for the simple reason you dont need the dowel sleeve adapters to properly center the head,lots of times I'll get a customer that attempted the LS/V swap themselves and not have compression,massive oil leak and numerous other issues cause of not using an...
  3. EG93sir

    how can i get more power

    I agree with EsolSI, GSR is the best head to swap to an LS block with the least hassle,the most gain for the dollar,wiring is sometimes scary to newbs but with sites like this one and some patience,you can do it. Try a simple tranny swap first,the LS tranny is great for a turbo car or a fully...
  4. EG93sir

    B16a wont start need help ASAP!

    the most overlooked problem with a no start civic is usually the main relay under the dash,you may have fuel at ignition on but not at cranking,dont even mess with a relay from napa they are junk,go straight to honda and pay a few more dollars to be sure the relay is pinned right.As far as your...
  5. EG93sir

    Suspension?

    be careful not to get swindled by some ebay low buck junk,with exhaust that fat be sure to get cracking on some engine mods to take full advantage of your parts,good luck an keep us posted,pics would be cool
  6. EG93sir

    Suspension?

    everything is compatible,chassis is the same 94-99 LS,GS,GSR
  7. EG93sir

    GA/FL area.

    Im here in Jax. and will only use SpeedFab or Stage 6,close group of friends,fair pricing with awesome quality work.
  8. EG93sir

    Itr head on b18c block

    replacing valves would be a great idea,especially for boost,i recommend intake valve upgrade to ferrea cause of meltdown usually occurs on the intake side,oem on the exh will be sufficient,double springs on both,porting will be dependant on your budget,mild or wild,ive had my pnp done by brent...
  9. EG93sir

    B18C idles like crap and dies at stop lights

    could be any number of things=main relay acting up,low voltage,air in the cooling system affects the iac operation,low fuel pressure can also be a culprit.start checking the basics and your maintenance records should be documented to keep up with what has been done as not to redo things
  10. EG93sir

    Need help with brake lights

    NOTE:beware of the switch adjustment,and the stop plate for the switch,theres a rubber stopper that dries out and falls out,I used a short 10mm nut and bolt to replace it
  11. EG93sir

    Need help with brake lights

    start by getting a test light,go under the dash and check to see if you have power on one side of the switch,if so,push on the pedal to see if it lights up on bth sides,if not,replace the switch.keep posting on it and ill keep an eye out if more help is needed
  12. EG93sir

    B18C idles like crap and dies at stop lights

    ELD=electric load detector
  13. EG93sir

    B18C idles like crap and dies at stop lights

    after you get the distributor issue fixed,sounds funny but check your voltage at idle,ELD has been giving alot of people the same issues,even me.LOW voltage at idle will cause the car to run like shit.loots of people have been throwing lots of money at this very problem with no positive...
  14. EG93sir

    Is your Hasport shift linkage as loose as a 2 dollar whore? Hymen Restoration.

    Perfect timing on this thread,Im having the same issue with mine,new it lasted about a year with very spirited driving,now its sloppy enough to cause a grind and miss shift,Hasport here I come!
  15. EG93sir

    Engine Help? swap

    If you take your time,do lots and lots of research(ths forum will help a GREAT deal)and your budget can handle it,Go for it!!Good luck.
  16. EG93sir

    new surging problem when accelerating

    ELD=electric load detector has caused the exact same problem with my hatch,higher than normal egt readings,surging the whole bit.I had to replace the whole fuse compartment under the hood as the eld is integrated into it.The 4 wire o2 sensors get their power for the heater directly from the eld...
  17. EG93sir

    Engine Help? swap

    gsr's aren't that easy to come by down here in the south,ls's are plentiful
  18. EG93sir

    Engine Help? swap

    LS would be a good daily driver,find one with low mileage if you can,clean straight forward and affordable on a budget,lots of fun too.
  19. EG93sir

    somebody plz help me

    yeah i see,on the obd1 dizzy that blue wire and a blue with yellow usually go to cps or tdc sensor and that may be the missing piece for the ecu to allow proper timing.keep us posted!
  20. EG93sir

    somebody plz help me

    I see so many times the trouble a obd2 to obd1 changeover causes,just remember patience and write down your specific changes,make your own diagrams of wire colors and what they go to,in the long run when problems arise,you have detailed info to repair your own ride.
  21. Try your Search on Google

Back
Top