Search results for query: *

im looking everywhere i found out how to take apart to get to the gears but do anybody found any info on how to put the diff in??? isint the bearing size 40mm i think im right

ok cool thank you for the info ill probably run a stage 2 clutch if i have the money i have a dsm turbo so i would like to be prepared

sorry for the mix up of words not new the axles and shift linkage from the si???

so am i right do i need new axels and shift linkage or can i keep myold ones ima get lsd in the si tranny

i have a 1990 Honda dx with a dohc swap with i/h/e and a chipped pm6 ecu this is my second clutch i burned out its time for a change in transmissions i wanna go with the si tranny. would i need si axles and the shift linkage??? thanx for the info

i had this car for months and i timing keep timing it and timing it and the engine light still comes on my car still red lines at 7 rpm with and integra ecu is the timing belt really the problem i hope someone here knows another problem for the code 9..thanks for helping

well the person who marked it we have it dead on so if its off a tooth do i move it to the left or right??

does anyone know how to get rid of code 9 i kno its the cylinder position does it have to do with the timing marks on motor??? and another thing does anyone has printouts for the timings marks on the zc it runs fine but its still missing a little bit...

no clogging new radiator now im back to the thermostat we took it out and the car didn't run hot so now i know the problem i took the one off my old motor that blew but the the thermostat in the zc was the same it kept getting hot should i leave the thermostat out??

there is no clogging ill have pictures tommorow

i change the thermostat change, the water pump and fix the fan and the meter still says its getting hot. but when i drove it it went hot and then went back down below half then stayed at half. u think its the meter or something else???

yea it is i was thinking it was the wiring but the injector plugs is loose i think it might be the clip to the speedo transmission im missing that one

almost done with my dohc zc i just need to know what do i do with code 17, thats vehicle speed sensor ??? i think code 16 is fuel injector right???? thanks for the help

its not good if the fan is on all the time when i turn the key on it stays on all the time but ill try what u said

so if it does work i should hook up the wired or the ground wire to another place right???

yea i tested it on the battery it comes right on

i just put in my zc and it is overheating my fan wont turn on its getting power and we tested it and it works, is it the ecu not telling it to turn on or is it the wiring . can anybody help me with this?????

i just put in my zc and it is overheating my fan wont turn on its getting power and we tested it and it works is it the ecu not telling it to turn on or is it the wiring can anybody help me with this?????

what is the timing for the zc i cant find it on this forum does anyone know???

well i got a new throttle body and a eacv but the cps connector is round yea i know i got the wrong one i think thats the only piece i need then i can start my car oh yea whats the timing on the dohc zc????