Search results

  1. M

    1600 to 1500 swap in 91 Civic EX non VTEC

    Are you using the vacuume advance dizzy? You should be using the stock electronic adv. distributor because it should work with that head.
  2. M

    Brake update for 1st gen CRX?

    Im pretty sure some of the EF brake stuff will work too, for the front anyway. But id just go with the integra stuff, and for the back you can convert to the integra disk brakes by grabbing the whole thing off the rear end of an 86-89 integra.
  3. M

    CRX 6 speed?

    The 4 wheel drive wagovan transmission is constantly considered a 6 speed :D :D. But no there was never a 6 speed for D series unless it was completely custom, it would be rediculously expensive to have such a thing made.
  4. M

    91 CRX motor mount problems!!!

    Hasport mounts are pretty much the only way to go.
  5. M

    D16A1 VTEC upgrade

    Thats a newer DOHC ZC motor, at least the head is anyways since the valve cover bolts are on the outside. I dont know if you can swap the newer DOHC heads for the old ones but i dont know why you would. Looks to me like you used the down pipe from the old DOHC manifold, but the top could be SOHC...
  6. M

    Best "Survivor" Yet? Wow, working for ratings

    I hope this show goes through because it will piss everyone off. And i like it when everyone is pissed off. its teh funny
  7. M

    84-87 civic swap to B18

    Do the integra swap with a nitrous kit. It will get you into the 13's. Im there right now with the ZC.
  8. M

    D16A1 VTEC upgrade

    Notice his age. Thank you. Im done.
  9. M

    D16A1 VTEC upgrade

    So how did you make up for the bend that goes into the oil pan? Did you grind out the ports on the manifold? They dont line up properly with the DOHC heads. If you put the DOHC gasket up to the SOHC manifold its slightly off. Ive tried this before and it didnt work without extensive...
  10. M

    ZC into 88 crx help !

    how the hell did you get an A1 to bolt into an EF without some extensive customization?
  11. M

    D16A1 VTEC upgrade

    actually the only transmissions that will work with it are the CG transmissions that come with the A1 and the 4wd wagovan transmission out of an 84-87 wagovan. Headers from single cams dont work without modification either and Vtec heads especially dont work.
  12. M

    Top 10 douchebag cars

    Ive actually never met a douche SRT owner. And i know quite a few of them...
  13. M

    Hi

    heres a couple pics of how it currently sits, minus the Works which were too big in my opinion... Now they are on my Girlfriends EF hatch :D. Wish i had more pics of the messy engine bay because that ones old and crappy, but i guess all you need to do is add nitrous solenoids and you'll get it...
  14. M

    86 crx HF swap

    You can also buy the linkage from hasport without having to customize anything. You'll have to specifically ask them for it though. Hasport Billet Mounts
  15. M

    86 crx HF swap

    The swap isnt as hard as it sounds... Dont let it scare you. Btw you have the perfect chassis to start with. HF's only weigh 1700 lbs. Wiring = easy, just get an 88-89 integra parts car. Out with the old, in with the new. Basically. You'll have to address the VSS issue though but its not too...
  16. M

    new to site and looking for insite

    Always check for rust when getting these cars, as they were very rust prone. Most common places for rust would be rear wheel wells, panhard bar, floorboards and sunroof (si's). The hatches also leaked quite a bit on the CRXs so i would check the spare tire area as well. Try avoiding aftermarket...
  17. M

    84-87 civic swap to B18

    Raxles sells B series axles for this car. You need 1st gen integra hubs to use them though.
  18. M

    87 Si looking to do H22 swap

    Theres a company that makes a transmission adapter for the H22 to use the CG transmission off the 86-89 integra (which bolts right into these cars). I could imagine this making it much easier to fit one of these motors into this car. On top of that you dont have to deal with finding custom axles.
  19. M

    1st gen crx si to vtec.....its gotta b cheap!!!!

    SOHC VTEC heads and EW motors dont mix. I wouldnt bother with this because by the time your done customizing the thing, you should have gotten yourself a GSR swap. You can however stick a D16a1 head onto the EW, but you'll have to use the D16 pistons. Its called a hydra.
  20. M

    Hi

    Noob here from washington state. I drive an old school 86 CRX DX. Cosmetically its completely stock, but ive done the Fuel injection conversion, and DOHC ZC swap, plus an NX wet kit. Running the 50 shot currently. Just a cheap daily driver, but fun at the same time. I see the 3g and 1st gen...
  21. Try your Search on Google

Back
Top