Search results for query: *

Check your cap and rotor first. I had the same problem and the rotor screw had came loose and fallen out.

Here's an update. Took the cap off the distributor and the screw that holds the rotor in place had came loose and fell out. Bought a new cap and rotor and its running like a champ now!

Also it's not throwing any codes. The LED on the ecu does blink once when I turn over the key but nothing else after that.

I have a 90 civic Si that I bought 2 years ago. Saturday I drove it to work and back with no problems. It sat till Sunday night I tried to drive it and it wouldn't start. Main relay is less than a year old. The fuel pump primes and I pulled a spark plug out and I see spark. If I keep cranking...

Thanks, i was messing with it earlier and it needed freon. It started working as soon as i filled it.

I have a 90 Si, my ac compressor is not getting any power. I have hard wired it and it will kick on. Is there a relay or fuse somewhere that would cause it not to work? Could the ac button on the climate control be bad? Any help would be appriciated. I live in TX and its HOT!

No the upper bracket doesn't line up right. Need to use the one that came on the b16a or i think a gsr one would work as well.

yes the upper one that bolts to the head

Do u have have any B16a or GSR power steering brackets

Want power steering in my car if u have one let me know. THANKS!!!!

I have a 91 DA with a JDM B16a swap in it. I want to put my powering steering back in it. Will a upper power steering bracket (one bolted to head) work from a 99-00 Civic Si. If not what will?

15 inch

Thanks plus les swhab sucks go to Discount Tire if you have one around you

All Honda and Acura vehicles except the ridgeline and new Honda odyssey require a ball seat lug nut for oe wheels. That might be what he is talking about. You might have acorn seat lugs on your oe wheels . Take one off and look at the bottom of it if its ball shape your good if not then you have...

Sent my wheels to be redone at a local wheel company. Had them put gloss black inserts instead of the factory gray.

I have a 90 integra with a obdo JDM B16a i can't afford a Skunk2 intake manifold yet so what other B-series manifolds can i use that will flow better than the stock B16a

You need to add a 2nd O2 sensor and wire it to the ecu or splice both O2 sensor wires together and run it on one O2 sensor . Im sure all JDM obdo ecu's run on a primary and secondary O2 sensor. Each one reads their own pair of cylynders. On your pwo ecu C8 (plug C pin 8) would be the secondary O2.

What kind of car is it in? I would buy a sub harness from www.rywire.com it easy and clean looking