My 91 integra b18a1 has about 165000 miles. Dropped the #3 intake valve.
Not real bad.....the piston only has slight marks.... for some reason when it came loose, the piston smacked it just right to bend it and wedge it so it was stuck half way open. Luckily I was in the parking lot at work and...
Get a piece of metal pipe like a fence post or exhaust tube and slide it on the end of your ratchet to give u more leverage. The longer the ratchet, the more power u can get behind it. Have a friend wedge a prybar or screwdriver in the flywheel teeth to stop the engine from turning. I have...
I just took my engine/tranny out my crx to find it had the wrong clutch on it like u describe. The clutch fit loose on the splines and would wobble around. I had been beating the dog #$%& out of it the whole time and I cant believe it didnt tear up the splines.
No I am not the one who put...
And the next victim is..... parts car # 2. Salvaged everything possible to sell for $$ to fund the hatch project. There wasnt much left when I got it , but I was able to use a few things here n there.
For u custom guys...........Take a look at the Dc door on the Eg coupe, fully custom baby.
Progress is slow, so not much to show. Havent given up, just been working on getting rid of the donor DC. We loaded it up with as much junk as we could find, and off to the car lot in the sky.
The new radiator core support is off the coupe parts car i picked up .
I called the guy and he said he had been parting it out and it was time for it to go.
I was only worried about the windshield being good so i could use it for the hatch and when i got there to pick it up I noticed it...
The engine bay looks good for a cheap flat black rattle can job. Went ahead and welded up the holes in the rear quarters that were probably from an old body kit or something.
Also picked up a pair of fenders today. I should have looked at them a little closer before gettin them but it was...
Got the engine bay cleaned up. Almost ready for some paint, probably just flat black. The beat up radiator core support is cut out . When I get some fenders I will be able to see how the new panel lines up before welding it on.
Thanx 4 the link. Its a big help. I think I will pass on the dash swap 4 now. I just got through the whole process of putting all the civic ex stuff in and it was a lot of work. I had seen a friend of mine do this a few years back but I didnt realize how much extra mods were needed to get...
yeah my hatch had a manual rack so I used the power unit from the teg. I didnt even drain the fluid out, just pulled the whole thing out as an assembly with all the lines still hooked up.
I did not realize I had to mod the door panels to fit the teg dash and i like my door panels just the way...
Its cool how so much of these two different cars are the same. I ended up pulling all the fuel lines out of the teg and they go right in the hatch. The only major difference was the very end in the engine compartment where the line meets the fuel filter. All I have to do is use a teg filter and...
Im back. Its been a while and I finally scored a parts car. Its a 95 teg that has kindfully donated its 4 wheel discs and master cylinder with booster. I also used the full front cradle with power steering. The front and rear sway bars are on now as well. The holes for the rear sway bar bushing...
Kewl man, thanx.
I was thinking the same thing. I have seen a few really clean hatches for 2-3k but then u just end up ripping out all the stock stuff anyway. And u know u want to paint it all fresh and clean since the paint is showing its age. This car will truly be mine now that I have...
Got the amber corner lamps off ebay. pretty sweet. Went back 2 the yard to get the wiper switch but it was busted up. People really dont give a #$%@ at the yard and just beat stuff up and throw it around if they dont need it. This weekend Im going to pick up a hood and some gsr seats. I started...
I threw in the climate boxes and made sure the air blows out all the vents at the proper speeds when commanded. The headlights work as well as all the taillights.. The wipers are acting funny so I think I will just try another switch. The SRS light was stuck on since the air bag isnt there. I...
Got the doors hung last night and threw the harness in loose so I could make sure the windows, mirrors, and locks worked before I made it permanent. So far so good..
The former owner had fun cutting metal out to try and save weight. The pass. door was actually pretty staright but he cut all...
No doubt about the damnits!
I paid Sixty dollars for the whole heap, delivered to my house. Not too bad but it almost should have been free. Oh well, its a good start anyway. All the others I have seen were at least $1000. This way I have something to work with slowly. I am still hunting parts...
There is a bracket on the front crossmember (right in front of the radiator )for the front mount that does not get used. I would cut it out before u put the motor in.
Its a bucket of bolts, but Ive seen worse. Still need corner lamps (e-bay deal)
Front bumper brace/support is gone. Anybody know if the windshields are the same on 4-doors, hatches, and coupes? I have the rear glass but need to glue them back in. The car came with some coilovers(cheap ones I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.