Search results for query: *

Alright, I have done my research, and paid my dues. time to start the build. Here's the list...so far DSM T25 turbo FMIC Greddy BOV Tubular Mani ARP Head studs Complete rebuild of the y7 (new bearings, thrust wahsers, etc...) Vitara low comp pistons Eagle rods Tunertoys 550 High...

Sorry for the repost, not sure how to rename my other post, If a mod could delete it, thanks Heres the list of what Im lookin for... All this is for a d16y7. forged low comp pistons and rods injectors, 450-550cc. chipped P06 ecu to use on my y7... OBD2 to OBD1 harness ARP head studs charge...

not lookin for the motor anymore... just stuff listed below... forged low comp pistons and rods injectors, 450-550cc. chipped P06 ecu to use on my y7... OBD2 to OBD1 harness ARP head studs charge piping for 96 civic Walbro 255 fuel pump seems it will be hard to find this other than ebay or...

OMG! By far the scariest game I have ever played, close to Silent Hill 2 for PS2. I have only played the demo so far, but it just came out yesterday and im pretty pumped to get it runnun on my PC. Anyone try it out yet? let me know how it is.... haha

Alright, here's my problem. I have a 96 Civic DX with the y7 in it. I wanna get a y8 and completely rebuild it, all the good stuff, and also setting up a turbo on it with a dsm t25, 550cc injectors 255 fp. I have all that down. What my question is and I have searched multiple forums for this...

nvrmnd. please remove

not sellin nemore, i had a bad day... lol

I just finished puutin a JDM Browntop ZC in my 86 CRX Si. Got everything hooked up correctly. went to start it and wont start. it cranks. fuel pump does turn on main relay works fine. i checked fuel pressure and im getting fuel up to the injectors. BUT... my injectors wont fire. im also...

Hey guys i have an 86 CRX Si. i just finished swapping in the JDM ZC motor. i got all the wiring and vacuum hooked up. i have a problem though. i heard it is possible to use a stock Si ecu to run this motor, but im starting to not believe it. I went to start it and no fuel is getting to the...

Hey guys ive got a 97 CRV motor and head, fully rebuilt inside. new rings, ALL new seals, new head gasket, cleaned EVERYTHING inside and out. new bearings. and thrust washers, everything torque exactly to spec, i work at Honda dealership in manchester NH, i have access to all rebuilds and specs...

I have a 1990 CRX Si shell for sale... body is in decent shape, no motor, no engine harness, new cornewr lights, radiator will need the mounts relocated cause its not the one that came in the car... interior is in alright shape... 250 obo, local pick up only

SOLD

Hey guys ive got a 97 CRV motor and head, fully rebuilt inside. new rings, ALL new seals, new head gasket, cleaned EVERYTHING inside and out. new bearings. and thrust washers, everything torque exactly to spec, i work at Honda dealership in manchester NH, i have access to all rebuilds and specs...

Good news about the swap, the car i bought already has the stock mount locations moved and rewelded for a b series swap, so all id need is the mounts, well, then i called the guy i bought the motor from, also a fellow technician, and he said he already has some b series mounts, :) all i need now...

Hey guys i just picked this up for $50 with no motor, but i got a b20 that i just finished building yesterday thats goin in it... heres some pics of the car and motor... In case your wondering too, the corner lights were stollen and the tail lights, side skirts and rear bumber were in...

I was wondering how difficult this is to do. im pickinbg the car with no motor in it, and i have a rebuilt b20b with an LS cable tranny, OBD0 LS ECU, is the wiring difficult or how bout the axles hubs and knuckles, do i need those...

Hey guys, i have a 97 CR-V B20B short block, has about 30K on it. replaced the piston rings motor is VERY clean inside, i was SHOCKED when i pulled it all apart. i can send pics upon request. I also have a 94 170 HP integra XSi head. fully rebuilt. with OEM everything. I ordered the whole top...

hey guys, im putting a D16A or browntop ZC DOHC in my 86 CRX Si, i know these bolt right in, but what parts from what car do i need to get, for example, what engine harness do i use, stuff like that, and another question, i want to boost this as well, is it a good block to boost, how much psi...

just like it says above, i need some cams, the ones i have are scored slightly, im building a b20vtec and wanna make sure its ood and reliable

hey guys,just wondering how "precise" we are talking to the valves and piston clearance with ctr cams, the block is stock 97 B20B and a stock 93 integra XSi 170 HP head/b16 head, i would like to do the ctr cams, but idk if it can be done with the stock pistons/rods... help me out