Search results

  1. G

    caution when buying from prostreet online

    Im not one for bashing on someones company or giving bad rep, but I have been nothing but patient with this company, and they are still giving me the walk around. Im sure that situations like mine are common amongst buying parts off the internet, but they have handled it very unprofessionally. I...
  2. G

    rough idle. stumped...please help

    ok i got the TPS sensor voltages set correctly. the problem did get a little better. From a cold start, it idles around 1200rpm VERY VERY nicely. then as it warms up it slowly drops off until 500-750rpms, still nicely, and then it begins to misfire very slightly. at this point in time, if u hit...
  3. G

    rough idle. stumped...please help

    Yes. im having a little trouble making sure the intake manifold plugs are correct. 1) the harness is an obd2 LS harness. 2) i checked d11 on my plugs and the color is pink black...unlike the multiple pinouts i read that said its red black. 3) on the few plugs that go around the manifold (...
  4. G

    rough idle. stumped...please help

    My car is a 92 civic hatchback w/ p28 (obd1). The engine harness is from a obd2 ls. running s100 The motor is a 95 ls block with a 2000 type R head. brand new fully rebuilt. At first start up there was a problem with the iacv, where (from cold start) it would roam aroun 2k-2.5k. once it warmed...
  5. G

    aeromotive fuel rail and precision injectors? help

    I have an aeromotive fuel rail and 650cc precision injectors for a 2001 type R head. The injectors fit in to the head (and are able to be pushed a good ways down) but the fuel rail side is to big. The injectors fit into the rail up until the o-ring (which seems to be too big). Any one had this...
  6. G

    WTB: hondata s300

    looking for obd1 ecu with honda s300 installed. must come with everything it came with from hondata. PM please. -thanks
  7. G

    question about b16 with LS 5th

    thats the reason :)...the ls fifth is a much longer gear, so instead of normal 4k going 60mph down the highway in fifth, it will be like 25-2800rpm i believe. as for strength or anything all honda gears, syncros, etc are weak and dont last very long.
  8. G

    question about b16 with LS 5th

    ive been doing some research to put a hydraulic LS 5th gear in my hydraulic b16 tranny but i cant find a good write up for this hydraulic transmission, everything is for cable trans. Im looking for a list of the exact parts thats needed...from my newly found transmission knowledge im at the...
  9. G

    manual swap

    your going to need to drop the automatic pedal assembly also, and put in a manual one...i didnt and the clutch pedal is behind the brake pedal..haha...... your also going to need the hasport conversion mount, or weld in the mnanual trans mount....i think the manual tranny is shorter thats why...
  10. G

    turbo reliability?

    alright sounds good. thanks.
  11. G

    turbo reliability?

    if i wanted to turbo my b18b with 160k miles on it....would there be anything i should do to make it more reliable and handle the boost better...i just picked up a cometic gasket set and thats all i could reallly think of...any other suggestions?
  12. G

    WTB: 94 LS 5spd convo parts

    bumpmubumpmubumpmub
  13. G

    JDM Front End Conversion

    its easy..took us less than 1 day.... take off hood, bumper, lights, side skirts, fenders, bumper support. drill out spot welds on "T" bar(radiator support) (roughly about 15 or so....just those little circles that connect it to the bar underneathe it) take new T bar and place it on top DO...
  14. G

    fuel gauge?

    I have a jdm ITR gauge cluster and the fuel gauge doesnt work....I think because its obd2 because I had a USDM GSR cluster that had the same problem....my stock cluster still works... is there a way to make it work? either making it obd1 or can i change the sensor setup to obd2 or is all that...
  15. G

    need help with transmission swap parts

    I have a 94 LS integra with a b18b inside. It is currently automatic. My friend is going to sell me a cable transmission off a B18A. What i want to know is what parts are interchangeable between the hydraulic and cable trannys, and what parts will HAVE to be for a 93 cable transmission. If so...
  16. G

    WTB: 94 LS 5spd convo parts

    I need the following ASAP: everything is for a 94-97 obd1 stock integra LS Manual ECU hydraulic lines (clutch master to slave) manual Intermediate Shaft call me 1-808-206-0379 Keegan shoots
  17. G

    ITR conversion headlight diagram?

    does anybody have the integra type R front end conversion headlight wiring diagram? Ive found multiple sites that "have it" but the picture got deleted....can somebody pm it too me or send me a link? thanks, Keegan
  18. G

    how far can you bore a stock ls block

    84mm is pushing it. anything higher is going to need sleeves.
  19. G

    clarification before i go ahead

    what if i wanted to bore out to 87mm? i would have to get custom pistons and such right? where would i go about doing that?
  20. G

    need a helping hand

    ah ha. i actually wrote that down on my little note pad notes page too, like 10 minutes after i posted that..haha..i feel dumb :)
  21. Try your Search on Google

Back
Top