i swapped trailing arms from a 99 gsr (or so i was told they were from) onto my 90 civic dx hatch. theyve been working great but lately ive noticed a bearing moaning on the highway. well i bought 2 new hub assemblies gor a 99 gsr. ive installed the drivers side with no problems but the passenger...
ok so i have a b16 swap in my 90 dx. well i just got it together and running again and shes running hot. i mean hot!! the damn t bar for the hood latch is even hot! no smoke, not burning coolant.... i have a aluminum full size rad and a slim fan. fan kicks on and works fine but doesnt seem to...
i have a 91 dx hatch with a b16 swap so i decided on doing a rear disc conversion. the rear discs are from a 99 gsr teg. everythings installed and working but im unsure what MC/ PROP VALVE combo to use. can i still use the dx MC since i still have the dx front calipers? everywhere i search ppl...
ive swapped an obd1 b16a into my 91 dx hatch. well i wired it for mpfi and the injectors function fine, its the dizzy im havin problems with. i keep getting a cel for crank angle sensor. its the only cel ive got doin this swap so its pretty damn frustrating. i have the 4 wires hooked to a plug...
im swapping a b16 in my 91 dx hatch. im using a hydro trans from a 95 gsr. well the hasport clutch release kit that came with my mounts was givin me hose clearance problems so i decided to go with their new clutch master adapter. well ive got it under the batt tray and fabbed some brackets and...
anyone know how the bushing kit is installed into the innovative traction bar on an ef? im confused on where the big washer goes in between the bushings
so i just installed a hasport linkage on my 91 ef b16 swap and a b&m short shifter. well the damnedest thing happens. when it should be in neutral its still in gear. all the gears are fine but when i shift into reverse then the speedo stops as it should when its in neutral. i have the car on...
i got the b16 in my 91 dx hatch ready to go. im having problems fittin the eg half rad in the ef chassis. ive found many threads on the subject but none helpful. they all say lean it...make brackets and such but not really specific. i was looking into getting the etd traction bar as i hear this...
recently i just started up my b16 swap in my 91 dx... but the head gasket didnt seal and it was burning coolant so i pulled the head back off. i bought an engine gasket kit and used the head gasket it came with. i was wondering what the diff is between a cometic, buddy club, and any other 3...
recently i just started up my b16 swap in my 91 dx... but the head gasket didnt seal and it was burning coolant so i pulled the head back off. i bought an engine gasket kit and used the head gasket it came with. i was wondering what the diff is between a cometic, buddy club, and any other 3...
anybody know which shifter bushing kit to use with the hasport shift linkage for my 91 dx b16 swap? i assume i use any kit for a b series trans since that part of the linkage is a diff size. but im confused cause the kits listed do not include the new metal collar that goes in between the...
soo i got my b16 swap running today in my 91 dx hatch. no trouble codes and everything was lookin good. started 2nd crank it was awesome. i believe im having timing issues cause it idles like crap unless i advance the dizzy as far as itll go. i was thinkin i switched the crank angle wiring...
wtf is this? i seen this pic on ebay. a guy was selling his 91 dx hatch. i was like wtf? a cupholder? where can i get one of these center consoles? never seen one before
does anyone know if a slave cylinder off a d series hydro trans will fit on a b16 hydro trans? im getting that new cable to hydro conversion kit from hasport for my swap . i have the master cylinder and i found a few d series trans with the slave still on em in the junkyard i was wondering if...
soo i came upon an intermediate shaft for the b16 swap in my ef. its from a 93 teg. but i have a hydro trans from a 95 gsr. it seems to fit and it bolts up fine. is this a workable axle combo? or do i need the 95 shaft.....
so i just bought some hasport mounts to finally drop the b16 in my 91 dx hatch and im noticing a few things..the drivers side engine bracket doesnt fit the mount, it came on the block when i bought it so i didnt think id need a diff one but the bolt holes dont align. also i have a 95 gsr hydro...
ive just finished a cam install on my b16. ive noticed its a lil hard to turn over by hand. ive torqued the cam caps and set the timing marks correct. so i was wondering whats a normal amount of pressure required to turn it over by hand? even with the plugs removed it seems the effort is still a...
had my 90 si d15b hatch emission tested today. first time since the swap. well after finally finding someone who knew how to drive a damn stick shift (3 test sites later) whattya know, it failed! high hydrocarbon and nitrogen levels..didnt fail by much , only like 20 points over standard. what...
i have the ctr n-1 pulley on my b16 swap and i need to know which alternator belt to use with it.ive tried belts for a gsr, civic si, and an ls but all are too long and are the same part number..dammit! help please :(
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.