Search results

  1. D

    need help picking a K&N filter

    AJUSA's customer service and service period has been outstanding for me,I've ordered 3 filters from them and the off road only one I wanted was out of stock for 4 days so they got it fairly quick for me then sent a filterwrap with it by mistake and me beliveing in karma called to tell them and...
  2. D

    need help picking a K&N filter

    I get mine from www.ajusa.com they also sell the race only K&N filters ,good prices and free shipping.
  3. D

    Magnaflow 2.25" exhaust, First Impression

    haha,I've got the harmonic thing with my apexi ws,its at 3 and 4,000 rpm only when I'm on it,drives me nuts but everyone says its ok so I'm not freaking but I have a coupe with a test pipe.I'm hoping that someday I'll have time to put my dc 4-1 jdm type r and a better test pipe and it will...
  4. D

    car overheating, thermostat?

    pull the thermostat,put it in a pot of water,put pot on stove,turn stove on put thermometer in pot note what temp the thermostat pops open. at 20 or so bucks the thermostat would be my first thing to testand get the honda one I went through 3 aftermarket and was still having probs until I spent...
  5. D

    Exhaust size

    I'm pretty sure 1.5 for a stock dx,lx,ex. and for your b16 just get a test pipe.
  6. D

    B16A1G2 Manual Swap into 93 Hatch Auto

    every pedal I used was different but mine came from a teg.if you use the old throttle cable you could use the old pedal but the B series throttle cables have a different connector at the pedal than D series from what I've seen.it was the easiest pedal to get out and put in if that helps any.
  7. D

    B16A1G2 Manual Swap into 93 Hatch Auto

    Sorry,I used a 98 GSR harness to cut out the wiring part on my obd2 si motor so I cant help you with that but check the engine specs part of the reference section to see what JDM car your engine could have come from.Yes the 99-00 has both o2 sensors but if you are running it obd1 you dont need...
  8. D

    B16A1G2 Manual Swap into 93 Hatch Auto

    I used my auto center console,had to get the shift boot from honda but it fit perfect.
  9. D

    B16A1G2 Manual Swap into 93 Hatch Auto

    99-00 Civic SI B16A2.
  10. D

    B16A1G2 Manual Swap into 93 Hatch Auto

    Wiring for the auto to man is easy. Take the two largest wires off the auto wiring under the gearlever and route them to the clutch pedal's lower connection,black with yellow stripe and black with white stripe dosnt matter which pin as long as both are there,this stops the car from starting...
  11. D

    BJ+driving = loss of license

    Thats cool they didnt press charges,I like to watch too...lol...
  12. D

    main relay under dash

    the ones I resolder last longer than the new ones in Iowa's climate.and really it only takes 15min,maybe 30min my first time but its easy and stronger.
  13. D

    throttle body

    Damn VTECin5th I hope none of those junk runs were from me.
  14. D

    Favorite food when you are broke

    bush's beans and cheap hot dogs or 10 for $10 banquet dinners at cub foods everyday
  15. D

    Help! what to do about my bushings?!?

    https://hondaswap.com/forums/index.php?showtopic=55076 three threads down and they say no press is needed but looks like most people used one.
  16. D

    main relay under dash

    My 89 accord used to do it on hot days also,its probably just dry sockets,you might just try resoldering it. If you pull it and open it up you can see the cracks around the posts,just clean em off and drop a new joint on em,very easy.I did it the first time I had ever used a solder gun. At $.50...
  17. D

    will wire work on new swap

    not sure on the fit but I can tell you the oem wires will give the most power,there have been numerous threads here and on honda tech,some with dynos and all.OEM's are the way to go.
  18. D

    2nd O2 Sensor

    Go to the junkyard and pull some ecu pins,in my car I used some harness pins to do my vtec into the ecu and no luck,tryed everything and the wire showed connectivety[?] but as soon as I put the right ecu pins on it worked fine,and the pins looked very similar but there is apperently that big a...
  19. D

    Swap is complete now...

    Glad to hear! allmotormonster reworked a p72 for my b16a2,pm him I bet he could do the same for you,fast shipping and turnaround also.
  20. D

    Picked up my motor and...

    For a 3rd confirmation I am using the 00si linkage and it fit perfect,and also a 95 teg rear bracket yes any 94-01 will fit.I had my car way up on some jackstands and dropping it out the bottom worked very well,slick actually.I also have both our helms if you need anything just pm.
  21. Try your Search on Google

Back
Top