Search results

  1. A

    COIL CONTROLLER FOR OBD1 (COIL ON PLUG)

    We've been working on a D17A2 EM2 to create a coil on plug option for OBD1 . here it is the link http://www.trojantuning.com/foros/viewtopic.php?f=47&t=757
  2. A

    Trojantuning.com - Individual Coil Pack

    Hello , Im trying to attach a coil driver to the oem obd1 ECU to have individual coils , any inputs or help is really appreciated , Im using an arduino micro controller for now to control separate channels for every coil , d17a2 coils (3wire) and Im thinking to take the ICM signal to know...
  3. A

    B16A Turbo Setup - Max power on stock crank ?

    We're building the b16 again for a little more power lol .we are changing pretty much everything , oil pump , adding darton sleeves , cp pistons , acl race bearings , eagle rods , arp head studs , and we are planning to get at least 550whp . but I don't know if the crankshaft can hold the stress...
  4. A

    Crome ecu good or bad for boost

    As simple as : hondata or crome , at the end , Honda ECU only knows one language to read. either is Hondata or Crome who is sending the information, hondata has an fancy way to do that . John Cui (crome creator) did something very smart , they gave us a peak of what crome was about creating...
  5. A

    Best Non forged pistons for H23 Turbo

    I've heard about good and bad choices ... but nothing straight. what about TopLine , RaceAxxis, mahle , is there more ?? we are intending to have no more than 250whp . or even less than that , I heard that stock pistons can hold up to 350whp , but we wanted to install something a lil better...
  6. A

    V6 OBD1 Chip ? Is that can be done ?

    I've been browsing for some answers regarding the posibility of chipping an ECU that works for a V6 honda engine , or is there any solution for this ? , I have a j30 engine and I would like to put it to work with a programable ECU , obd1 is my first option but I haven't found any info about it...
  7. A

    Maximum bore on Stock sleeves B series

    So , what do you people think about buying darton sleeves 84mm instead of 81mm ? Im planning 500whp at some point !
  8. A

    Maximum bore on Stock sleeves B series

    no I didn't , I heard that all 3rd generation of b series has the same oil pump , but there is a difference between 1st and 2nd , regardless ... I need it a new one !
  9. A

    Maximum bore on Stock sleeves B series

    well yes , bought a new ITR oil pump !
  10. A

    Maximum bore on Stock sleeves B series

    I was making a little research just to find out what is the maximum safe size to bore the stock sleeves on forced induction . I was pushing 300whp with stock sleeves and I had a spun bearing and the cylinders looks like I need to go for the next size , but I wanted to know if 81.25 its fine...
  11. A

    H23 With A H22 Vtec Head

    that's true !
  12. A

    H23 With A H22 Vtec Head

    I believe it doesn't matter if its 5 years old , Im doing the swap very soon and I was googoling, and this is one of the results in the first page . basically there is no certain information and it will be fine if we keep posting in this thread cause it will make it stronger, people will not get...
  13. A

    B16 Engine Problem

    Hello guys , a friend is having an issue with his engine he just build it and like 200 miles after a cylinder got broken for some reason , he has stock sleeves , wiseco pistons, pistons are overbore to 82mm, eagle rods , ACL race bearings , built head ( ferrea valves, briancrower springs), arp...
  14. A

    vtec engage how to know

    just temporary install a light bulb on the solenoid , 12v is sent from the ECU to open the solenoid , the bulb will light up when vtec engages , this will tell you if ECU is opening or trying to open the solenoid if you want to test the solenoid , just disconnect the connector in the solenoid...
  15. A

    Tuning Questions

    Exellent , give us numbers when you get it done , good luck with everything !^_^
  16. A

    Tuning Questions

    The only problem would be when you make a change on your car , and you will need a new tune . if you get the stuff and you learn how to tune , you will not have to pay the rest of the tunes of your car everytime you make a change or upgrade something
  17. A

    Tuning Questions

    +1 N/A = 13.5 Boosted = 12.5 at high end should lower .5 points at least !
  18. A

    Tuning Questions

    CROME free does not support datalogging until you pay for the license you need Real time emulation (ostrich) , and Hulog datalogging and emulation is REQUIRED for tuning , it gives you exactly where you are standing on , Im not the best tuner in the world but I have CROME pretty much covered...
  19. A

    MOUNT KIT FOR B16A on a EG

    I will do that , I will call them to see if they can give me a straight answer , here is the pic of the left mount , I know is two bolt one
  20. A

    MOUNT KIT FOR B16A on a EG

    2 bolt left means that the distribuition mount only has two bolts !? , i guess is that one then I found it here too Hasport Performance Online Store
  21. Try your Search on Google

Back
Top