Search results

  1. A

    COIL CONTROLLER FOR OBD1 (COIL ON PLUG)

    We've been working on a D17A2 EM2 to create a coil on plug option for OBD1 . here it is the link http://www.trojantuning.com/foros/viewtopic.php?f=47&t=757
  2. A

    Trojantuning.com - Individual Coil Pack

    Hello , Im trying to attach a coil driver to the oem obd1 ECU to have individual coils , any inputs or help is really appreciated , Im using an arduino micro controller for now to control separate channels for every coil , d17a2 coils (3wire) and Im thinking to take the ICM signal to know...
  3. A

    B16A Turbo Setup - Max power on stock crank ?

    We're building the b16 again for a little more power lol .we are changing pretty much everything , oil pump , adding darton sleeves , cp pistons , acl race bearings , eagle rods , arp head studs , and we are planning to get at least 550whp . but I don't know if the crankshaft can hold the stress...
  4. A

    Best Non forged pistons for H23 Turbo

    I've heard about good and bad choices ... but nothing straight. what about TopLine , RaceAxxis, mahle , is there more ?? we are intending to have no more than 250whp . or even less than that , I heard that stock pistons can hold up to 350whp , but we wanted to install something a lil better...
  5. A

    V6 OBD1 Chip ? Is that can be done ?

    I've been browsing for some answers regarding the posibility of chipping an ECU that works for a V6 honda engine , or is there any solution for this ? , I have a j30 engine and I would like to put it to work with a programable ECU , obd1 is my first option but I haven't found any info about it...
  6. A

    Maximum bore on Stock sleeves B series

    I was making a little research just to find out what is the maximum safe size to bore the stock sleeves on forced induction . I was pushing 300whp with stock sleeves and I had a spun bearing and the cylinders looks like I need to go for the next size , but I wanted to know if 81.25 its fine...
  7. A

    B16 Engine Problem

    Hello guys , a friend is having an issue with his engine he just build it and like 200 miles after a cylinder got broken for some reason , he has stock sleeves , wiseco pistons, pistons are overbore to 82mm, eagle rods , ACL race bearings , built head ( ferrea valves, briancrower springs), arp...
  8. A

    MOUNT KIT FOR B16A on a EG

    Im kind of confused regarding this , someone can help me out ? Im about to buy a mount kit for my B16A its on a EG civic hatch 92 CX , and the ebay guy said : only if you have 2post ??????????? the kit works for B or D :confused::confused: , is it going to work my car ? ...
  9. A

    CIVIC 2002 ECU Situation

    Im thinking about buying a civic 2002 Si , but with the engine broken and ecu broken too, :eek: , I've been researching about the ecu and more to see if its worth it, my question is , I know that k20a3 has no distributor , and therefore there is no way to install a obd1 ECU , not 100% sure , but...
  10. A

    B16 Clutch Difference ?

    Im looking for a new clutch and I wanted to buy this one , but it says that only works with 99-00 b16A , is there a difference with mine ? , mine is a 2nd generation b16a , hydro tranny ...
  11. A

    D15B JDM and Y8

    I looked around and I can't find a straight answer and I can't get like a final information about the difference between d15b head and z6 head and how much torque in ft·lbf the D15B has , I saw 14.1Kgm but I don't know how to convert that number , my intentions are that I would like to install...
  12. A

    New LMA's with Forced Induction

    I ordered lost motion assemblies from hondaautomotiveparts.com and they didn't send 14820-P30-010 , they sent 14820-PCB-305, I talked to them , and they said that they upgraded the lma's and everytime that you order 14820-p30-010, you will get the new ones, I don't know if they will work at all...
  13. A

    Honda and Water/Meth injection

    I searched but I haven't get a straight answer , plus I want to know if it will help me to be in a better secure point and let me get more whp , or it's a waste of money ! , thanks in advance
  14. A

    B16A Max Power ??

    hello people , I wanted to ask how many whp I can take out from my engine and be safe at the same time . I have this: b16a JDM stock sleeves eagle rods wiseco pistons forged Turbo Kit - t3/t4 2.5 inch exhaust pipping TiAL 38mm wastegate. 450cc DSM injectors Walbro fuel pump Tunning with CROME...
  15. A

    Where I can buy LMA's

    I tried looking on ebay and nothing , is there a place I can buy the lost motion assemblies? tried to google it but nothing !!
  16. A

    D16a6 Block -> D16a9 (dohc) Pistons ->y8 Head

    what would be good recomendations for a setup like this D16A6 BLOCK -> D16A9 (DOHC) PISTONS ->Y8 HEAD ??? compression is 250psi per cylinder. thanks
  17. A

    F22A6 with VTEC Head , Turbo ?

    Im helping a friend who changed his f22a6 head for an VTEC head from an accord , he lost power since he changed the head , he lost compression too, at this point he would like to know if he did something wrong cause he is thinking about putting a turbo kit , but he needs to know if he has to do...
  18. A

    KNOCK Sensor , Blue or Black ??

    does somebody knows what knock sensor should I buy ? I saw that there is for sale blue or black , are they the same ? I have b16A JDM Thanks..
  19. A

    B16a turbo HELP

    Help People , I race my car yesterday, ran excellent , but for some reason started to do something totally weird , imagine that car has a bad spark plug , like working in 3 cylinders, then if you open the throttle a little bit , i goes like normal, I think it didn't lose power cause i drive it...
  20. A

    Injector Size ?????

    Is there a way to know the size of my current injectors ? how can I know if they're the stock ones? or bigger?
  21. Try your Search on Google

Back
Top