Can someone tell me the difference between the 7th gen EM2 DX/LX and the EX engines. I know that they are both 1.7L and wondering if I can install parts made for the EX into my LX since I havent found any sites that sells parts for the LX. :D
I just swapped a H22A along with LSD tranny into my 95 lude. Engine started up nice with no complications. When it came to test driving it, I was able to get the car in gear but when i released the clutch, it sounds as if the gears are no engaging or something like that. I asked the shop where i...
Do you know like the location of the ground wire under my engine? So that way I have a general idea where to look. Also, I did get a dizzy from I think a B20 since it has an internal coil. It came with an OBD2 connector though. What I did was cut my wires from my OBD1 harness and connected each...
I had an external coil dizzy that came with the H23 but the JDM H22A came with an internal dizzy and i converted the H23 harness to make it an internal dizzy. I read on other threads that the starting valve is not needed on the JDM H22A. I hooked up all my vacuum hoses according to the vacuum...
I checked everything that I could think of and the car still will not start. There is spark, there is gas, and i checked all my grounds. I even made sure all my vacuum hoses were connected. One thing I noticed was that the JDM H22 did not come with a starting valve on the intake manifold. Would...
I tested it that way. Took a spark plug with wire attached and placed it close to metal object and had someone crank. Sparks came from each plug and wire. From what I see, I have 3 ground wires total. One on the driver side engine mount, one that should be on the harness (usually found near...
So, I finally got spark from my dizzy. Seems there was a ground near my thermostat that I missed. Car seems like it wants to start when I crank it. Im told that I might have flooded my engine with fuel while trying to start my car. Any suggestions on getting rid of the fuel? When I pulled my...
I found the 2 "clock faces" one points to the letter "A" and the other to "8". The one pointing to the "8" has the number 94 in the middle. So... I'm assuming that the engine is a 94 H22A. As far as the dizzy. I got a dizzy from a 5th gen lude which has an OB2 connector and figured out which...
I just swapped a H22A into my 95 prelude. Car doesn't start. The engine turns but will not start. I checked out the dizzy because I plugged up a spark tester to it and got no spark whatsoever. I tested the ignition coil and igniter and those tested good. I even replaced the cap, rotor, and spark...
H22 Dizzy solved.
I found out how to convert a H23 with external coil to H22 dizzy with internal coil. All you do is cut the yellow wire (hot wire) from the external coil wiring (H23) and splice it to the black/yellow wire which goes to the (+) side of the internal coil for the H22A dizzy. All...
I just dropped a JDM H22A into my 95 lude. Was a fairly easy swap except that the original engine was a H23 and came with a dizzy with external coil. The H22 dizzy has an internal coil. I am using the H23 wiring harness. I tried using the H23 dizzy but engine cranks but doesn't start. I asked...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.