Search results

  1. N

    Endyn LS Block Girdle

    What he said. That old man is full of sh#t!
  2. N

    CTR pistons on LS rods?

    I am using CTR and LS rods. You need to have the small end milled to fit in the piston. I would have as little as removed as possible. Because this weakens the rods. My machine shop did this for 40 dollars and that included pressing the pistons. good luck.
  3. N

    WTB LS crank

    Just like the title says. I of course will pay for shipping, crank must be in good condition. No spun bearings etc..
  4. N

    let me know what you guys think

    These are my opinions..... Take them for what they are worth. CTR pistons :thumbsup: Spoon sports drain plug : A waste of money, change the oil more often. Unless money is no problem. And if its no problem why are you driving a Honda? Skunk2 vavle springs and retainers: I have used them...
  5. N

    cam caps

    If it were in focus, I could tell for sure, but it looks fine to me. I have used some less than perfect heads that worked out just fine.
  6. N

    ls/vtec 210whp??

    I made 195 whp with CTR cams and a b18 bottom end with CTR pistons. I think i can be done, it wont be easy however. I would get bigger cams if you want that kind of power. Or you will have to spend big money on head work.
  7. N

    Low dollar 12 second all motor update.

    Yea, thats me. I still own it. Its hard as hell to sell a race car. Especially if it doesnt run a 10. I still dont feel as if i can compete. I did sell the head and throttle bodies. No one would buy the block. So I bought a new head, and am going to change some things, and hopefully run a...
  8. N

    K20 in an EG dyno vid

    Man, I can't wait till the price on these motors come down.
  9. N

    Low dollar 12 second all motor update.

    LOL, I feel you bro. Thats a lot too read for just a little info. The compression is right around 12 : 1 . Its CTR pistons in a ls/vtec. Jason, I rarley see Eddie only at races. But if I do see him on a test and tune night, I will let him know. And we were at Palmdale last year. Ran...
  10. N

    Low dollar 12 second all motor update.

    Yea, we know Eddie Mesa. Nice guy. He repainted his car silver with skulls and graphics and stuff. Looks good and hauls ass. He and Dave Chan, the owner of Import Power have the 2 fastest all motor cars in Arizona.
  11. N

    Low dollar 12 second all motor update.

    Thanks guys, we will be selling that header along with this car and trailer,(This is my race car not the low budget beater) as soon I get it to run a 10.(All motor) We are also accepting interesting trades. Got a boat or 95 hatch plus cash? We made the header for the race car, about 2 years...
  12. N

    Low dollar 12 second all motor update.

    I dont think it was too difficult. The motor did follow the norms however. Response to cam timing etc.. As i retarded timing the motor would run more lean. The only explanation I could come up with is that the fuel was blowing by the spark with more advance. And when the timing was retarded...
  13. N

    Low dollar 12 second all motor update.

    Here is a picture of the header I am using. I will be trying to make a big tube 4-2-1 design next. 1 7/8 to 2 inch stepped. I think that this header is too small. And its not equal length either. Going for 200whp with all honda Internals.
  14. N

    Low dollar 12 second all motor update.

    no I wish it had LSD. Just the stock open differential. Maybe I will get a Quaiffe later.
  15. N

    Low dollar 12 second all motor update.

    I am using a PR3 ecu. I did not use a knock sensor. The "Spoon" chip deletes the knock sensor, O2 sensor and Vehicle speed sensor. I know this because My header has no O2 and my speedo doesnt work. I dont know if the Vafc will engage VTEC without have a VTEC ecu. I dont think so however. I...
  16. N

    b16 with 89 gas n now its knocking

    if your really concerned you can hook up a hose to your return fuel line, and drain it into a bucket or something. Just let the car idle. The fuel will drain the tank. Then you can put in fresh gas.
  17. N

    Low dollar 12 second all motor update.

    2 liter EG- Your numbers are 197whp and 150foot lbs? What is your set up? I looked like you are using crower cams.
  18. N

    Low dollar 12 second all motor update.

    i am confused too, but it is defiantely after TDC which doesnt make sense. Screw it ... it will still run 12's
  19. N

    Low dollar 12 second all motor update.

    I understand that its fireing on the power stroke. So tell me how a car runs if you are trying to ignite after the compression stroke.. The car shouldnt even run. You know ---suck-squish-bang-blow. Again if you are trying to ingite on after bang which is whats happening. 2 liter EG- I am sure...
  20. N

    Low dollar 12 second all motor update.

    My best pull was 195.2 so I round up to 196. This was after the car was allowed to cool off due to the heat soak. But consistently 191 to the wheels with 137 foot pounds. I am using some B.S. EBAY Spoon chip. It really whacked out my timing. In order to make the power base timeing at idle...
  21. Try your Search on Google

Back
Top