Search results

  1. J

    Car idles rough

    H7 is a degreaser like Castrol Purple stuff or whatever. I was saying that too (about the vacuum) but its not like you could put throttle body cleaner (same thing as carburator cleaner) on your paint cuz it would eat away the clear coat. I think the amount of grime that was on the TB helped...
  2. J

    Pressure Plate Problems???

    Thanks for the advice guys but i took it to my mechanic and he fixed it in like 5 minutes. All he did was take some of the play out of the clutch pedal (it wasn't so obvious to me). It works fine now, like brand new except for the extra stiff pressure plate B)
  3. J

    4th ad 5th gen lube into One!

    I like how the front end looks with 5th gen headlights and the 4th gen grill and indicators. Looks like the new 350 Z somehow Now only if they could do the back........
  4. J

    Car idles rough

    I reused the old gasket (it looked pretty good, no cracks or tears). And there is no flathead screw on the TB (atleast its not on the top of it). I tryed some kind of test to see if i was losing vacuum on the TB, i took a shred of plastic from a plastic bag (real thin) and i revved the car...
  5. J

    Car idles rough

    Ok here the rundown. I had a problem with my throttle sticking right so I worked up the courage to take off my TB (BTW I have a F20B TB, its the same as the H22A) and when I took it off i was like WOW. It had a lot of grease and sooth in it. So i took the throttle plate off and cleaned it...
  6. J

    F20b And H22a

    Just thought id clear something up as I am probably the only one here with a F20B Accord SiR-T. Yes they do have a LSD. I know because when i dropped my tranny to swap in my clutch and flywheel, it was very clear to see (you can see right through it).
  7. J

    Pressure Plate Problems???

    You're saying that i should press the clutch in and then press the brake in gradually then do the opposite and that should let the air out?
  8. J

    Pressure Plate Problems???

    Ive heard about the clutch lines and whatnot but my clutch fluid reservoir is full with no leaks. Could the stock rubber clutch line have expanded because of the more pressure it has to exert to disengage the beefier pressure plate. I'm just wondering beause I don't think the pressure plate...
  9. J

    Pressure Plate Problems???

    i have like a stage 3 clutch in my car with a HD pressure plate and a sprung six puck clutch with a aluminium flywheel. Now when i first installed the clutch and flywheel along with the new throwout bearing, the clutch disengaged at say 1/8 the way down (pedal travel). Now its been like...
  10. J

    High octane Loses power

    In Japan where all Hondas are born they use 100+ octane from the pump (thats all they use) so the Honda engineers anticipated this and tuned the ECU accordingly. That being said i dont think USDM motors and ECU's were designed to use 100+ octane since they dont allow that in the US on the road...
  11. J

    Supercharger

    Ah Ha so you admitted to the superior bottom end. I dont think the turbo car will start to pickup noticably in the top end (to say pass the other car) if they have the same peak HP. The S/C also makes peak Hp at rev limit being that it is run by the crank pulley. Another thing you cant run...
  12. J

    Supercharger

    For Integra1990 This just came to me (another V8 thing). Whats the most horsepower you've seen from a turbo car? I can guarantee its nowhere near 4000+ hp seen in S/C topfuel drag car.
  13. J

    Supercharger

    To reply to Kyle, my car doesnt have a powersteering pump (came from factory that way and uses a electronic servo instead) so i was planning on mounting it there (custom mounts) and getting a USDM crankshaft pully (mine only uses one belt) to turn the S/C. I think it may kinda tight with the...
  14. J

    Supercharger

    First of all. Dont take it personal. A lot of people swear by turbos as the ultimate (and only) way to go fast, which I guess you also believe in?? You think that only turbocharged V8's can run 8's. Long before turbos became popular they were supercharged V8's running 8's so how limited is...
  15. J

    quad throttle bodies

    i just want to try to redeem myself. Its true they may have cold air intakes for M3's but i have yet to to see one for Hondas (which this topic was started for) that have a ITB setup.
  16. J

    Supercharger

    Sorry its didnt notice your previos post. I dont like the JRSC because of where it operates. Since it replaces the intake manifold, it builds boost in the manifold itself (hot compressed air sent into the combustion chamber) which makes conventional intercooling impossible. That being said...
  17. J

    Supercharger

    Im going to reveal a little known con in the import performance market. Some companies give a different product number for the same part. What they then do is charge different prices for the same parts for different cars. EG: 4 Cylinder 98-02 Accord Flywheel= Part#XXXX-XXXX-12 $350...
  18. J

    Supercharger

    That just another example of turbo hype (2Fast 2Furious :lol: :thumbsdown:). Fact= The first 200 mph streetable B16A Civic was Vortech supercharged (made 600+hp to the wheels). It wasnt done by a million dollar budget team, just some guys with a little imagination, alot of willpower and a...
  19. J

    quad throttle bodies

    From what i've learned ITB's are more for circuit where quicker response is critical. On a 1/4 mile response isn't so critical. While ITB's do make hp, they are primarily used to make the engine more responsive They also dont allow for a cold air intake and thus have to draw in hot air from...
  20. J

    Turbo Question

    I knew YOU would say something like that. Stop Hating :( :thumbsdown: So why do people actually make cam gears???? What would be the purpose???? Their purpose is to adjust cam timing. I was not saying you're going to retain stock idle. But who cares about a perfect idle as long as the...
  21. Try your Search on Google

Back
Top