Search results

  1. O

    front driver's side mount 93 to a 96

    So I was out the other day changing trans on my HX, and guess what? My HX HAS a aluminum A/C combo engine mount bracket. So it is not only VX with aluminun stuff, the HX also has aluminum mount(s). I'll check the alternator one, but I kinda sure it is cast iron on my HX.
  2. O

    d15B dual VTEC O2 wire

    yes that is right, the single VTEC-E uses a 5 wire, so does the HX manual D16Y5. The above is only about the 3-stage VTEC that has dual solenoids and is a D15B. The reason I'm asking is that all three: D15B 3-stage VTEC, D15Z1 VX, D16Y5 HX are ALL lean burn engines. I don't know how a D15B...
  3. O

    d15B dual VTEC O2 wire

    the ones I've seen in person are one 02, the ones I've seen on VTEC Asia must be one 02 and they run a tri-Y like a 98 EX here so the 02 is under the car, I've seen dual 02 on some pictures. All comments are about dual VTEC engines.
  4. O

    d15B dual VTEC O2 wire

    I got a reply from a Vendor and his from " D15B Sohc Vtec Engine Honda Civic 96-99 OBD2 Acura EL " is one wire. also this one looks to be one wire too. eBay Motors: 96-00 HONDA CIVIC SOHC 1.5L DUAL VTEC ENGINE - D15B (item 280209042826 end time Mar-24-08 07:00:05 PDT)
  5. O

    d15B dual VTEC O2 wire

    thanks, I got the info from the reference section here and other places. SOHC D15B vtec 130ps@7000/112lbs-ft@5300 3 Stage VTEC+PGM-FI bore x stroke 75.0×84.5 1,493cc, compression = 9.6:1 92-95 Civic VTi 96-00 Civic Vi I'm about 90% sure the 92-95 version is single wire
  6. O

    d15B dual VTEC O2 wire

    I'm asking about only dual VTEC engines. D15B with two VTEC solinoids. These engines came in both OBDC1 and OBDC2 versions. I'm asking if ALL versions have only single wire 02s. thanks
  7. O

    front driver's side mount 93 to a 96

    OK I got a reply, only the aluminum alternator mount will fit, the driver's side engine mount will NOT fit from 92-95 and 96-2000 d series.
  8. O

    d15B dual VTEC O2 wire

    Are all D15B 130 HP dual VTEC engines single wire 02? Since there were made for so many years and both ODBC1 and 2 I would think the ODBC2 setup would be at least a 4 wire. Any ideas would be helpful. From the pics, they all look to be single wire.
  9. O

    front driver's side mount 93 to a 96

    I can get an aluminum VX 93 front drivers mount, will this fit my 96 HX? Looks the same but you all know how that goes. If anything the 93 mount looks shorter at the bolt that sticks out the front of the engine.
  10. Try your Search on Google

Back
Top