Search results

  1. 1

    k20a or b18c experience?

    Remember to get papers of the motor and if its legit.
  2. 1

    Jdm H22a Helppppp!!

    Can you post pics of your work.
  3. 1

    1987 Acura Integra

    try this https://hondaswap.com/read-first-frequently-asked-questions/search-engine-you-70856/ keep searching you find it
  4. 1

    will a JDM d15b engine bolt up to a si tranny?

    Treat the Si with care it is getting hard to find.
  5. 1

    Bad Rings or bad valve seals???

    a slight gain of hp. I pr3 pistons in my stock b16 and compare to ol mini me swap slightly the same. 10.5:2
  6. 1

    B18 into EF

    New mounts than the oem stuff. And if you buy hydro kit with the mounts. It would be a great deal of savings than buying individually.
  7. 1

    1987 Acura Integra

    It should fit. try this link Honda-Tech.com: Acura Integra: ****INTEGRA FORUM FAQ****
  8. 1

    89 crx swap

    injectors are all same 230cc and vtec run 3 wire to ecu for vtec and oil pressure and a ground.
  9. 1

    need quick response!!!!!!!!

    Go with stock now and if you have money upgrade.
  10. 1

    B16a rev-limiter kicking in at 7-7500 rpm?

    air leak does not exist. Vacuum leak exists.
  11. 1

    Seat Belt, Actuator Thing, Need Help Please!

    To remove panel. Use a special pry to remove the windows roller thing. All you have left is 6 screws around the panel side. Now pull from bottom to your way up. shouldn't be hard.
  12. 1

    dohc zc swap Q

    A PM6 would work from crx si
  13. 1

    b16 in 90 teg...

    DUBC read carefully prior to replying to me.
  14. 1

    A Few Simple DOHC ZC Q's

    You are noob.
  15. 1

    Big Big Problem!!!

    Compression test and see if according to spec. IF lower piston rings need to be replaced.
  16. 1

    wiring harness Q

    Get an SI or ask rywire.com to make you one. OMG. When you search harder you will find it easier to get answers sloved prior to posting an ad:mad:
  17. 1

    Need Help Asap

    Its hard cause the o ring is stuck on the hole. To remove this. Twist counterclockwise and fast to clockwise with the adding pull every turn. IT SHOULD COME OFF.
  18. 1

    89 crx zc swap. help

    You must have all harnesses to operate the car. Interior stuff not required except drivers seats.
  19. 1

    Big Big Problem!!!

    Check for fuel filter isn't clogged;)
  20. 1

    cooling

    Get a Koyo EG half-size radiator if you plan to upgrade to turbo.
  21. Try your Search on Google

Back
Top