Search results

  1. SprintCar00

    b20 with a b16a sir2 head

    you know theres only one way to really learn anything and thats to do it urself because other than that u dont really know when somebody is feeding you a line of shit unless youve already been through it.. i mean im takin in all ideas and ill have my own plot at the end of this. but im kinda...
  2. SprintCar00

    b20 with a b16a sir2 head

    ok so tuning is the biggest thing.....of course. im currently using the p28 ecu with a hondata s200 is this good enough to tune the motor to its full potential. also what size injectors would be recommened? im currently using a cheapo ebay header but my plan all along was to do this right and...
  3. SprintCar00

    b20 with a b16a sir2 head

    gotcha. and yes i realize i have two cams. im not that dumb. i do know a little about engines. mostly about methanol driven sbc's though. im learning. so basically if i go with a mild cam something in the middle of the range. i should be fine by just adjusting the cam gears to obtain clearances...
  4. SprintCar00

    b20 with a b16a sir2 head

    b20 block. and does that mean that i basically have the same head that comes on a 1999-2000 si? what does the ctr head come on then? b16b? and if i dont have the ctr head that would mean that i dont have the ctr cam... correct?..... and i would need to get an aftermarket cam? i was also looking...
  5. SprintCar00

    b20 with a b16a sir2 head

    ok so ive been on the internet researching about this build for the last week or so. and i plan on putting the 12.0:1 je pistons in the block with shotpeened stock rods and a polished knife edged and balanced stock crank. also putting aftermarket itm valves, valve springs and retainers all most...
  6. SprintCar00

    b20 with a b16a sir2 head

    i have been looking to get more power out of my motor, i got a b16a sir2 in a 1997 civic, hondata s200 chipped ecu, and a edelbrock throttle body, it puts out 166 whp and only 113 wtq, and i was wondering what i could do to get more power out of it for a reasonable price. and a guy told me if i...
  7. SprintCar00

    b16a to 1997 civic wont start

    i changed the plugs to the other ones, and got a 3 and a 7 code, the o2 sensor code went away, and the car wouldnt rev up and was idling irradic so i switched the map sensor back and it went to the normal idle and reved up fine, i cant find a multimeter that works in my garage so i have to go...
  8. SprintCar00

    b16a to 1997 civic wont start

    the ecu set codes 3,7,41 map, tp, and o2 sensors my wiring harness came with both the b16 and the d16 wiring adapters on it so i have two of everything which makes it hard and ive been switchin em around trying to get the right ones so im gona go switch those again and c what codes it sets and...
  9. SprintCar00

    b16a to 1997 civic wont start

    i also keep forgetting to put on here that i dont have my evap canister vacum line hooked up because i couldnt find the vacum nipple anywhere on this engine to hook it to. i dont think that that would be a big issue but i also dont no.
  10. SprintCar00

    b16a to 1997 civic wont start

    havent checked fuel pressure, ill get on our computers at work we have a subsription to alldata and see what fuel pressure i should be at and check that, i was also told to check the output of the tps with an ohmeter? seems like a good idea make sure i dont have a bad tps. the black oil...
  11. SprintCar00

    b16a to 1997 civic wont start

    I am running the p30 ecu, and i tried hooking up our snap-on solus scanner but couldnt get it to connect with the ecu i think thats because its and obd-1 ecu in a obd-2a car? how would i get it to pull the codes? the car is deffinately running rich im getting about at the tops 15 m.p.g not...
  12. SprintCar00

    b16a to 1997 civic wont start

    stupid me forgot to hook up a ground. it fired right up as soon as i got that done, the motor seems to run good on top end but really rich on low end and its sucking gas. the motor wouldnt rev up after i started it so i unplugged the tps and it revs up but has a flat spot at about 3500-5000...
  13. SprintCar00

    b16a to 1997 civic wont start

    i put a b16a obd 1 into my 1997 honda civic lx. i had the wiring harness rewired by hasport and got the ecu with the motor swap. the motor turns over but wont start. all lights on the dash ex. the check engine light, oil pressure lights all go off while turning over so i thenk its hooked up...
  14. SprintCar00

    D16Y7 to B16A2

    and when i get the ecu where can i find the wiring diagram to know which wires to hook up the vtec
  15. SprintCar00

    D16Y7 to B16A2

    thank you. that helped anybody know exactly which motor/transmission mounts that i need so i can got to the junk yard and rob them out of a car?
  16. SprintCar00

    D16Y7 to B16A2

    Ive read alot about differnt things that i may have to do. so information seems to conflict with others and im not real sure what i need or to do when i get the motor. i have a 1997 Honda Civic LX a grandma car and i finnaly belw it up a couple days ago and bought a b16a2 OBD 2 or OBD 2B motor...
  17. Try your Search on Google

Back
Top