Search results

  1. faithster

    714 SOCAL OC B16a swap complete with chipped ecu just rebuilt!

    Whatsup hondaswap ! I haven't been on here in a good minute ! Well I'm here posting my b16a swap for sale ,me and my buddy just rebuilt this this a few hundred miles ago and it runs like a champ ! Vtec pops really loud no hesitation . Has brand new oem Honda green bearings,rod,main and...
  2. faithster

    rex wont start

    first off is it an si? if not then check your ecu wires make sure none are pulled,chances are if the rex is a dx he did the mpfi wiring and a wire must have slipped out or u got the wrong starter if it dont turn over
  3. faithster

    can i use 1 P2P Y8 rod on my ZC??

    im wondering if a p2p y8 rod will work perfect for my sohc zc for piston #1 I am going to re use all 3 of my other rods but i dont know if i can just throw them on or go take my crank and rods for balancing. please get back to me
  4. faithster

    92 h23 transmission fit 97 H23 VTEC LONGBLOCK??

    hey im wondering if a h23 non vtec transmission will fit a 97 spec euro R H23 blue top long block and can i use the same flywheel?? thanks HS
  5. faithster

    dopping a gsr in my ls

    do i also need to wire up the o2 to obd1? or my jumper harness will do the conversion?
  6. faithster

    dopping a gsr in my ls

    come on...........
  7. faithster

    dopping a gsr in my ls

    hey whats up HS i got an integra ls and i recently just got my hands on a gsr longblock so i was thinking of dropping in thr gsr with the ls tranny. now my question is I have a 2000 integra which is obd2b and the gsr longblock is OBd1 and i was wondering if i can use a jumper harness using...
  8. faithster

    What kind of turbo is this??

    it can be used for a b18 turbo setup? what type of manifold header would i need?
  9. faithster

    What kind of turbo is this??

    hey i got this turbo just recently and i dont know what kind it is since it has no plate or stamp on it and its only oil cooled but that turbine looks fu***ng Huge. do you guys know what kind of turbo fitting i will need for this like what turbo headers and downpipe? thanks guys
  10. faithster

    blown head gasket???

    yeah it is oil/water cooled turbo with inner wastegate,turbo isnt fully installed still need to put the vacuum lines and piping,and i had the car running before but it was non vtec not its vtec
  11. faithster

    blown head gasket???

    the oil looks black,watery not slipery or anything like that car idles really low
  12. faithster

    question on swap d15b vtec

    you will need the mpfi conversion done first before u can even do ANYTHING with your car,then if u want vtec connected the right way u need a obd0 to obd1 jumper harness and a obd1 distributor. Cut the plugs from an 88-91 si dizzy and the harness and put those plugs on the obd1 dizzy use p28...
  13. faithster

    blown head gasket???

    hey whatsup fellas ive been working on my project car for 3 months ,its a 89 civic sohc vtec turbo and i just got finished up some wiring problems now i changed the head with a vtec p08-1 and put on a z6 head gasket on the d15b shortblock. Everything was running cool only minimal smoke from...
  14. faithster

    Help!! 94 civicwith d15b7, swapping in a d16a6

    yes the trany will fit prefect without any custom work,but you might need a new clutch kit as the spline count on the tranny might be diferent. you can use your same ecu since its non vtec and you will need your obd1 distributor and alternator think thats about it.
  15. faithster

    dpfi to mpfi now i got problems

    ok thanks so the tdc sensor makes the car idle like that and shut down?
  16. faithster

    dpfi to mpfi now i got problems

    could it be the dizzy or timing can be way off cause i changed the belt but i have both head and piston1 at tdc
  17. faithster

    dpfi to mpfi now i got problems

    yeha i took my engine harness out and redid everything,i ran the 2 extra wires from the mpsi dizzy straight to the ecu and rechecked everything that was conected to the ecu,As for the vtec im going to wire up my vafc2 controller for vtec and turbo,the car worked fine before but now its acting...
  18. faithster

    dpfi to mpfi now i got problems

    ITS obd0 pm6 ecu and obd0 si distributor the longblock was d15b non vtec but put a p08-1 vtec head on so now sohc vtec with obd0 dizzy which doesnt line up corectly
  19. Try your Search on Google

Back
Top