Search results

  1. B

    what will fit in 99 accord lx 4 dr

    My boy got a 99 honda accord and he wants to do a swap maybe a h22 or h23 let me know what would be the best swap and what will fit. let me know what it would take to do
  2. B

    wtf? not running

    i checked and set my timing perfect i dont know what is going on it should be running great
  3. B

    wtf? not running

    i have new plugs,sparkplugs and a distributer what else could it be
  4. B

    wtf? not running

    i have a 93 ls in a 1990 hatch . i have already done the dualpoint to multipoint( i did it the right way to i got a custom harness from hasport cost me a lot of money to like $315 with the cost of the a uncut dx harness and an uncut obd-0 ls(91) harness) my motor runs but only on 1 cylinder(...
  5. B

    93 GS Integra to 88 CRX DX/Standard Swap

    have you tried the axles through the hubs because you you usually have to change them as for the map sensor i used one out a 91 integra and wired the purge valve and map sensor in to my ecu this may not help but it may oh my swap was a 93 ls into a 90 dx there may be small differeces between...
  6. B

    wont start

    well when trying to turn over my motor i burned up my starter so i am guessing that a power wire is grounding out somewhere my grounds started smoking and everything so how do i locate all the power wires?
  7. B

    wont start

    i have a 93 ls mounted and ready to go in a 90 dx hatch i bought a custom harness from hasport so i wouldnt have to do the dual point to multipoint wiring but i cantget it to start i changed injectors and dizzy but it wont start the guy that owned my hatch before me relocated the battery to...
  8. B

    92 Civic hatch with h22 fs

    yo this daniel from cowpens came and looked at the hatch do you still got it?????
  9. B

    rev hard

    swap the two outside wires on your tps
  10. B

    Speed govenor on a pr3

    does the speed sensor also control the rev limiter how do you take rev limiter off if not
  11. B

    shift linkage

    get a custom one from hasport or ebay would be the best way to go but if you feel like doing the modification you could get a ls shift linkage and cut to make it shorter not sure on how much shorter it needs to be i believe it is 2 5/8" but im not sure so dont quote me on that
  12. B

    b16 distributor plug

    do search on dualpoint to multipoint there are two wires that you need to run from ecu pins b10 and b12 these wires are you crank angle position sensor wires there will be a blue/yellow and a blue/green im not sure which wires go to which pins thats why you need to do a search
  13. B

    axles ABS

    does abs have to do with the motor or with the car i need to know quick car has to be done soon thats all i am lacking does 90 dx hatch have abs or what
  14. B

    axles ABS

    thanks guys
  15. B

    axles ABS

    I put a 93 ls in to a 90 dx hatch when i go to get axles (90-91 ls axles) they ask if i got abs and i dont know does it matter or can you tell me if i do or dont have abs thanks for your help
  16. B

    dizzy

    i put a 93 ls motor in to a 90 dx hatch do i know i got to change dizzy to obd0 will a dizzy off of a 89 teg work and then injectors since i had to rebuild motor harness can i just solder those plugs on the harness so that i can use them or do i have to get obd0 injectors?????
  17. B

    90dx 93ls swap for sell

    i have a 90dx with 93 ls swap(not running due to wiring issue)( already converted from dual point to multi point) needs axles 2004 civic blue with fade 18inch koing rims yokohama parda spec2 tires aerospeed coilovers ys1 tranny new clutch full exaust intake(#4000 )obo i also have an 88 dx with...
  18. B

    dizzy,injector questions wiring

    i did and couldnt find anything so y not just tell me instead of being a dick head
  19. B

    dizzy,injector questions wiring

    does any one know about the dizzy and injectors obdo motor harness obd1 motor can i change the plugs
  20. B

    dizzy,injector questions wiring

    i am putting 93 ls in 90 dx hatch what do i have to do to go from obd0 to obd1 motor do i have to change the dizzy and injectors to obd0 or can i just change the plugs and does it matter what obd resistor box you use matter
  21. Try your Search on Google

Back
Top