Search results

  1. C

    SOHC ZC W/ VTEC HEAD

    whats up man? I have a sohc zc with a z6 head with i/h/e in my 89 crx si. Awsome improvment over the stock zc. I will never go back. i got the y8 head gasket and the z6 timing belt with the stock dist. with the notches cut out. and for the computer i got a stock ls. With the...
  2. C

    reving up and down

    ok i got rid of the iat code. now i got code 14 iacv and 43 Can any one tell me if the 43 code would pertain to the crx? Remember i got a pr4 ls ecu. i got the fluctuating idle gone but now she revs to 2grand at the stop lights. I'm getting really anoyed right now cause this is my only ride...
  3. C

    sohc zc cam

    yeah bro. the sohc zc cam is alot nicer than the a6 one. Especially 4500 rpm and above. But i swapped my head all together for a z6 and do not regret it. So if you know anyone who wants to buy a zc head shoot me a line. honestly though do the cam swap you'll love it.
  4. C

    reving up and down

    I tried the gum cutter trick. No such luck. Atleast my engine is clean now. Besides all the gaskets are new since the head swap.
  5. C

    reving up and down

    Ok once again im here with a lil issue with the sohc zc. I did the mini me swap on the zc a few months ago. And alls been good since until now. The other night my crank pulley flew off. Luckily it happend while i was sitting in traffic. Well the next morning after work i got a new pulley bolt...
  6. C

    89 crx si sohc zc vtec

    I'm in Va.
  7. C

    89 crx si sohc zc vtec

    Ok i got a 1989 crx si for sale or trade It has a zc/v-tec sohc 1.6L z6 head rebuilt hot tanked and milled.it also has a header, 2 1/2" custom exhaust with a high flow cat back to a stock style walker muffler to keep the cops off my case. It also has a msd full ignition, motor mount inserts...
  8. C

    sohc zc vtec

    i swapped a d16 z6 head onto my sohc zc block and now i get a slight valve knock under load situations. I had the head rebuilt before installation so all the parts are good i hope. I also just checked all the valve adjustments and timing adjustments. All is on time. I was told due to having...
  9. C

    h22 into a 92 gs-r integra

    i got the b17 in the crx whick i just sold
  10. C

    zc-vtec

    i'll try the pr3 i got one laying around anyways thanks alot people
  11. C

    h22 into a 92 gs-r integra

    does anyone know?
  12. C

    h22 into a 92 gs-r integra

    i got a 92 integra gs-r and i got an h22 sitting around. Is it possible to put this motor in it? and if so where do i get the mounts at?
  13. C

    zc-vtec

    if i use one of those ecu's wont the cel come on since i dont have a knock sensor?
  14. C

    zc-vtec

    Ok let me tell you what the car has already as far as mods go. I got an ls ecu, msd ignition, header, hi flow cat and exhaust. and a b&m fuel pressure regulator and gauge. Right now i am engaging vtec through a switch and i got the fuel pressure boosted to compensate for the...
  15. C

    zc-vtec

    is there a v-tec ecu that will plug into a crx?
  16. C

    zc-vtec

    i swapped a z6 head onto my sohc zc an i now need to know the best way to control the vtec? any suggestions?
  17. C

    D-SERIES TRANS ON LS BLOCK

    well the ls trans sucks and i got like 4 d-series si transes laying around. and its too hard to find a good cable b-series trans that aint grinding already
  18. C

    D-SERIES TRANS ON LS BLOCK

    IS IT POSSIBLE TO ATTACH A D-SERIES TRANS ON TO A B-SERIES BLOCK USING AN ADAPTOR PLATE?
  19. C

    Will Si Dizzy Fit DOHC ZC?!

    yeah it will fit just got to wire the cylinder position sensor
  20. C

    FS:obd0 and obd1 distributor

    you still got the b16a dist.?
  21. Try your Search on Google

Back
Top