Search results

  1. A

    Need a "how to" on H22 LMA's in a B16

    I have a 1st gen obd0 b16 with CTR intake cam and GSR exhaust cam. I finally tracked down my CLICK-CLACK to the LMA's. Instead of buying the B16 ones which a more expensive I'm gonna go with the H22 lma's. I know a 0.040 spacer/shim is required for these to work properly, but where do I get it...
  2. A

    Obd0 B16 Cps?

    Thats what I thought but just wanted to make sure. I found a place that sells the TD-22u for $130 shipped, but they don't have an address on the website which seems kinda weird to me. Let me know what you guys think. AM Autoparts - 1988 - 1991 88-91 Honda Civic JDM B16A Ignition Distributor 89
  3. A

    My CRX

    I actually have an ignition module that I just bought from honda today. I don't need it because it turns out my CPS is bad, which means I need a new dizzy. PM me if you're interested.
  4. A

    Obd0 B16 Cps?

    Where is the crankshaft position sensor on a B16 located? Thanks.
  5. A

    B16a wont rev past 5k

    Yeah I think I'm gonna take all the stereo equipment out and see how it does. The battery is in the trunk so it wont be too hard to unhook it all.
  6. A

    B16a wont rev past 5k

    The only code it's throwing is 23 which is knock sensor. When I bought it the idle was a little high, but I adjusted the Idle Air Valve, or w/e it is, the idle kind've wanders a bit, which I believe is caused by the FIT valve. As far as the stereo etc is involved I don't know. I drove it three...
  7. A

    B16a wont rev past 5k

    Alright I was driving and my car and the rpm meter went down to zero, but when I gave it gas it would go back up then the car shut off again. I pulled the cap off and the rotor isn't melted. The only thing I've done to the car since I got it is put a system in it. Is it possible that the system...
  8. A

    B16a wont rev past 5k

    I guess when I was checking all the fuses I forgot to put the ECU fuse back in the right place, which is why it wouldn't rev past 5k. I'm an idiot. It doesn't look like an OBD0 Integra Dizzy will work, Does any one know the part# or #'s of any that will work. Again the motor is a 89 SiR B16a.
  9. A

    B16a wont rev past 5k

    One more thing, when I went to go get the rotor, I had to get one off of an 89 crx si. Will a distributor for an 89 crx si work on my B16?
  10. A

    B16a wont rev past 5k

    Well I took the main relay that I bought back and just used the old one. Where can I get an OBD0 distributor for a good price? And might anyone have a picture of this vtec control modual? Thamks
  11. A

    B16a wont rev past 5k

    Ok well I just bought an 89 ef sedan with a b16 OBD0. It ran fine for about 5 days then as I was driving down the road it just shut off. First I thought it was the main relay, went and got a new one, put it in but did the same old crank over, but no start. Anyways long story short, my rotor...
  12. Try your Search on Google

Back
Top