Search results

  1. R

    OBD1 Ls To OBD2 GSR

    PS pump isnt anything once the motors out...its not even a big deal when the motors in. If you dont have the pump off the LS you can find one for about $20-40 used at any junkyard. Its held on by I think 2 bolts and the ps line is held on with 2 bolts...simple. I used a dc sports 4-1 header...
  2. R

    OBD1 Ls To OBD2 GSR

    I just swapped a 00 GSR into my 94 LS myself. You will need a GSR Throttle cable for starters or you can rig your LS(ONLY if your desperate). As far as the wiring goes, I used a obdI p72 ecu with my motor. The harness's plugged right in and I just had to wire in 4 more wires to run vtec and...
  3. R

    Where to buy JDM ITR .25 Pistons?

    Does anyone have a site reference or a store reference that sells JDM ITR .25 Pistons at a good price other than jdmhondaparts and inlinefour?
  4. R

    How do i know difrent from gsr and si 00 transmiss

    https://hondaswap.com/reference/index.p...php?mode=tranny
  5. R

    Crank Angle Sensor missing!!! HELP URGENT!!

    What car is it going into now?
  6. R

    b18c5 in to a 93 civic hatch?

    Whoops...sorry...I didnt even realize it was a type-r motor.... :blink: :worthy:
  7. R

    b18c5 in to a 93 civic hatch?

    I had to use a P72 GSR OBDI Ecu with my USDM OBDII Motor into a OBDI Car. I used the OBDII engine harness which plugged in to my original chassis harness. I think it makes a difference though if its a USDM or JDM. If its OBDII, I believe its going to be USDM. Didnt have to buy a different...
  8. R

    b18c5 in to a 93 civic hatch?

    If you have NO experience then I wouldnt recommend this particular swap for your first one BUT you wont learn until you try it. Check out the articles section and use the search feature. There is TONS of info on this site alone for this type of swap. Its not TOO difficult but research it and...
  9. R

    second Butterfly pinout help please

    https://hondaswap.com/swap/viewer.php?id=51
  10. R

    Bent Valve

    If you bend a valve in your head, will your car still run? :blink:
  11. R

    Tranny question...00 B18C1

    Bad syncro maybe?
  12. R

    B-Series Shiftlinkage

    Are they the same from 94-01 for all makes...GSR/LS/ITR?
  13. R

    Has anyone done it?

    I would stay daily driver IF its for your wife. I know of someone who had a h22 into a integra shell and the oversteer was ridiculous when dragging. NOW, I know your wife MIGHT not drag, but thats kinda the point of swapping a h22 into a smaller shell right? For daily driving, its just not...
  14. R

    Tranny question...00 B18C1

    What could cause a tranny to pop out of gear by itself? Meaning, through all the gears theres no problems, no grinds, and its smooth. All of a sudden, when I put it into 5th and ride at about 60mph a few minutes later it just slides out of gear. When I put it back into gear theres no problem...
  15. R

    94+ Integra Guage Cluster Question

    Anyone know which wire is the tach wire that plugs into the guage cluster. Im thinking its the solid blue wire that is pinned to the single yellow plug but im not sure. Anyone? :huh:
  16. R

    IAB/GSR Wiring Question

    Got it...nevermind. :blink:
  17. R

    B-Series Distributors

    Are they the same being obd1 92-95 are the same not matter what model motor and 96+ obd2 are the same not matter what mode motorl? There is a place in Canada that sells them for a good price, as thats what they are in the business of doing and when I ask them for the particular year I need...
  18. R

    00 B18c1 Wiring question

    Figured it out... :blink:
  19. R

    A/C Compressor surge

    For some reason my a/c compressor surges in what almost seems like cycles. It'll stay on for a minute then shut off, then back on, off, so forth. Does anyone know the cause of this or what could cause this?
  20. R

    OBDII B18C1 Distributor with OBDI Ecu?

    Never mind...found it in the articles section.
  21. Try your Search on Google

Back
Top