Search results for query: *

so im gonna trade or sell my truck to get a car my options are: 1998-2002 Firebird Trans Am Camaro Camaro It will be a V8 and 6 speed if its one of these possibly S2000 or STI open to other ideas also (no mustangs or ford products lol) i still have my 90 hatch and plannin to build...

Post up your favorite set of wheels any offset any size any brand! I have a thing for these bad boys 949 6ul nickel plated

I have a y1 tranny and want to swap in an s80 5th gear. My issue is the mainshaft on my y1(cable) is smaller than the one on the s80(hydro). I thought all b series gears were interchangeable?

Really just testing waters. Like the title says its a 90' Civic SI. I swapped in a high compression jdm B20B(B20Z) with an estimated 30,xxx that I bought from JDM Engines Corp., innovative motor mounts, B18A1 intake mani., thermal intake gasket, ebay CAI,Blox FPR & gauge, DC 4-1 header to 2...

Wheels have NO curb rash at all, just minor chips in the paint from living down a dirt road & driving 60 miles to class every day. The inside of the passenger side front wheel has a small amount of paint rubbed off because a faulty brake line. Tires have alot of life left, at least 90% up front...

Fixing to paint my car and i'm having hell with the moldings. I know there is a nut at the back that has to be removed, then you remove the door panels and pop the clips to remove the molding. My problem is there are 2 enclosed reinforcment bars running along the inside of the door that the...

I'm a student at Texas State Technical College in Sweetwater Tx. TSTC has a dynameter that is rarely used, the instructors there know how to operate it, but dont know how to upload new software so they dont use it. After a ton of begging I finaly convinced one of the instructors that if i could...

testing to see what i can get for them... i tried putting them on my hatch and they wouldnt fit if there is not a reasonable offer i will just find a way to make them work :D

Like the title says I am using a Y1 tranny with lsd and in 5th @ 70mph my tach is sittin a 4,250rpms. Is it really supposed to be that high?

Finally decided to post some pics up of my EF went from the stock suspension, destroyed konig theorys, and stock single cam to JDM B20Z with LSD Y1 tranny B18A1 Intake Mani. fidanza lightweight flywheel exedy stage 1 clutch ngk plugs & wires DC single piece header Blackworks Racing 2 1/2 core...

I swapped a b20z into my SI and rewired an OBD1 dizzy to make it work. I have fuel and fire, it will start and run for 30 seconds or so then putters out. Idles irradicly, tack goes CRAZY. Timing is dead on. I am throwing code 4 (crank angle sensor), i have switched ECU's just to make sure , i...

i bought innovative mounts to swap a b20z into my ef the rear mount and trans mount are fine but im having issues with my driver side mount. on my b20 there are 2 threaded posts that are tapered at the bottom that my mount slides over the problem is my mount wont go over the tapered...

alright guys i need some opinons cuz im making this way harder than it is i want to throw some 16'' wheels on my EFand i would like to spend less than $500 thoughts anyone?

how does nitrous ratio hp/lbs-ft ? i know a 50hp shot is an extra 50hp but what kinda torque would that result in?

can anyone tell me if they have done this swap and if they were satisfied with it? and just for kicks and giggles this is my setup so far JDM B20B (B20Z... it has the knock sensor) DC single piece 4-1 header ls intake mani with the b20 60mm tb innovative crossmember with bushings to...

i just got a complete b20z and in the near future i want to go with a vtec head other than the golden eagle kit, drill some holes, and run oil feed lines what do i need to do? and also what head would be the best b16 or gsr? (thinkin gsr) and do i have to get it tuned? (i dont think so...

I got a crx off a kid with KYB shocks, Skunk2 coilovers, Integra rear-disk brakes, and a Y1 tranny with 60,xxx miles for $200 :D my question is what did the Y1 tranny's come out of and it has a stamp on it that says YSK whats that mean?

Can you use this ecu on a daily basis or is it for tuning purposes only and if so is it worth getting? here's a link King Motorsports Unlimited, Inc.

Testing Waters - 1995 EG Hatch FS FT PRICE DROP: $2,400 or trade for a CRX other offers considered just tell me what ya got Since these pic's i have put in a short ram intake, had the windows tinted, and full audio system (HiFonics Zeus 6 1/2 door speakers, tweeters, & crossovers). the...

I'm getting ready to swap a b20 into my ef hatch:ph34r:, the problem is the b20 is OBD2. I've heard i can use my stock d series dizzy but wasnt sure so... true or not?:confused: