Search results

  1. J

    idle problem and misfire? video inside

    could the car be getting to much fuel because i just found out it has a 255lph fuel pump
  2. J

    idle problem and misfire? video inside

    i dont think i have one i 4got to mention that i have a b20 in the car
  3. J

    idle problem and misfire? video inside

    how do i check vacuum
  4. J

    idle problem and misfire? video inside

    helllppppp
  5. J

    idle problem and misfire? video inside

    ok i amm having a problem with my integra it has a b20 in it and it will not idle right and at times it will idle fine and then while i drive it at lights and stuff the idle will act up also the car has a misfire i believe if i pull out the spark wires from 2,3,4 then idle decreases but it feels...
  6. J

    teg wont stay on

    ok guys i swapped a b20 into my 94 teg and i think im having problems with the fuel, im using my old fuel rail and injectors because i have a jdm b20 and the fpr is on the other side since the jdm is right hand drive, but i turn the car on and it will crank and start the rpms will go to about 2k...
  7. J

    after rebuild problems..

    i took off the head and i put it back on the pistons at tdc, then i put the cams at the correct spots both putting up and now i can turn the car on it stays on few a few seconds idles very rough and dies and if i open the throttle body then if dies immediately
  8. J

    after rebuild problems..

    ok so i rebuilt my ls with all oem parts, and i put it in the car and it started a couple of times and now it won't start at all and when it did start it would idle around 400 and i would have to play with the throttle, i could hold down the throttle and it would not affect the idle would not go...
  9. J

    engine swap help

    need help asap
  10. J

    engine swap help

    help??
  11. J

    engine swap help

    i used an obd2 harness on my obd1 engine but the problem is i think the intake manifold and head are obd2 im not 100 percent sure because the kid before me had the motor and blew it up but anyway i had to cut the harness because i had an obd2 and bought an obd1 and i connected the fuel injectors...
  12. J

    abs lines

    ok well i was looking the shell i bought and i noticed my abs lines just cut where can i get new ones?
  13. J

    need hekp with engine code

    Ok i need help figuring out what year my head and block the head reads: A003050205 pr4-5 block reads: 1348948
  14. J

    need help with wiring harness

    ok i bought a motor from my friend and i have a block from a da and a head from a 99 and i dont know what harness to put on the motor? please help
  15. Try your Search on Google

Back
Top