Search results for query: *

old thread but still got that VAFC?

i have a 1994 accord lx and was wondering if with a 2" drop will i have to get a camber kit or is 2" ok on stock camber?

no one has an old OEM one?

alright everyone i talked to says i need dyno tune and all that and adjust timing to play with the vtec. ill keep thinking on it thanks

how much for just fuel rail? is it stock?

it was a wet nos fogger system so on the fuel rail there is a bolt thats capped off so in order to get fuel the bolt needed to be bored out to fit the nos fitting into it so that the solenoid could get fuel to mix with the nos to spray into the intake as a foggy mixture so now that bolt has a...

im in need of an f22b1 fuel rail OEM,OBX,AEM whatever as long as its a good price used or new i dont care i installed a wet nos kit and want to take it off i need a new rail for my accord ASAP

do you have the wiring instructions for the VAFC 2 and instructions? and also is it hard to tune the A/F ratio?

alright ive just heard of people by passing them or soldering the lines and what not but if i dont need it then that works too lol thanks for the help

im having the same exact problem as you are and i replaced my IAC 3 times and nothing changed so i researched for weeks and weeks and there is a sensor on the bottom of the throttle body called the fast idle thermo valve FITV the only way to get this part is from honda (VERY VERY PRICY) or a car...

i was out looking on my accord with the f22b1 and there is no vtec oil pressure switch. my new solenoid i just bought has a pressure switch plug yet theres no way to plug it in...anyway to bypass it or will it work without it?

im throwing an ELD code, a misfire code, VTEC solenoid, and automatic transaxle but i have 5speed and i have no idea about the misfire how can i check misfires? ive got perfect compression all around

ok i ordered the new vtec solenoid from honda so ill replace that whole assembly will that help my problem with reving out at 5000RPM?

alright thanks well hopefully i can get my vtec working i did a motor swap and im throwing like 4 codes its just hell right now for me and this car

ok thanks ill definately try it i just ordered a new vtec solenoid so ill put that in with gaskets. can i use gasket maker for that to see if it works?

could that fix my VTEC problem? as of right now i have no VTEC and im reving out at 5000RPM

where do i find the gasket for this?

my vtec solenoid on my 1996 accord vtec is leaking oil underneath really bad any ideas? im throwing a CEL 21

ok heres the deal i put a 1996 accord f22b1 VTEC in my 1994 accord non vtec...i got the motor in and the ECU i had to use a "jumper" cable because i was going from a obd1 to obd2 but now im throwing VTEC solenoid code, ELD, misfire,and automatic transaxle codes..the motor was an automatic i put...