I think that wire used to go to the one wire o2 sensor
I am going to wire up,the hf engine harness and see what I get
If I have the boomslang jumpser on the ecu would it matter if it is a hf or si
will i have to change the jumper on the dizzy if i use the hf engine harness it had the si...
ok did that still nothing now i get code 9 flashing I still have that single black wire under the dizzy that i dont know where it goes there is nothing to plug into but looks important
on the obd1 distributer the white wire is the one to cut and connect?
code 16 is gone now still no fire at...
ok found out the blk and yellow green wire goe to the fan switch still need help with the single black wire under the dizzy its a single black wire and when i skin it back it has a white wire inside with a wire wrapped around it its missing the end...
I had a 1990 crx si with a 1995 b18c1 in it at 290,000 the bottom end gave out
2 years later which is now I rebuilt the motor and put it in a 1991 crx hf
I am using the same engine harness that i used in the si with a ecu jumper from boomslang the resister box is out and all wires tied in using...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.