Search results

  1. R

    I need a Vtec tech!!!

    ok thanks for that, my speed cable is in, i'm not sure about the sensor but i don't thinkso. I can get it right up to 8000 rpm and i've had it where my speed cable unhooked before, then it only revved till 7000 i think.
  2. R

    I need a Vtec tech!!!

    o i see, i don't think i need to replace it but i thought if it was just a switch and it wasn't working that would be a cheap place to start.
  3. R

    I need a Vtec tech!!!

    okay thanks vtecsir. Now a few questions about the vtec solenoid. Do all solenoids fit on all generations? mines a jdm b16a first gen. What is the top part of the solenoid where the one wire runs to? I can buy a million different colors of covers for it but can i replace that part? I had the...
  4. R

    I need a Vtec tech!!!

    Matts96HB-thanks for your input. One question tho...can you explain where on the back of the block i can get my oil pressure from? and even if my engine oil pressure is good i could still not be getting the pressure i need at the vtec solenoid right?
  5. R

    I need a Vtec tech!!!

    yes yes i realize this tranny will slow me down, my future plans include rebuilding the Y1 tranny and running an all motor set up. I did swap high comp pistons in there however and even with this tranny and vtec not working i can pretty much keep up to my buddys b16a2 :)
  6. R

    I need a Vtec tech!!!

    Hey everyone, I got a 90 integra with jdm b16a. Tranny was shot so i swapped in a tranny from a stock integra off of a b18b. I've hooked everything up the way it was...i think. i'm getting know codes from my ecu but my Vtec deosn't work! I'm wondering if its a speed sensor, or a in gear...
  7. R

    Vtec wiring help plz!!!

    Hey guys, So I got my moter back into my car after doing a rebuild, but I can't get Vtec to work. The guys that did the b16 swap into the integra did an awful job with the wiring so its been a pain trying to figure it out. Here are some pictures that will hopefully help clear things up...
  8. R

    Air Fuel Ratio Tuning help please

    Thanks guys although I won't be converting to obd1 just yet. But now my biggest issue is getting my vtec to work again :( after putting my moter back in the car my vtec doesn't work, there is some loose wires so it probable has something to do with that.
  9. R

    headers???

    I bought some headers, and I can't remember for sure...its been a while but I think they sold as "B16/B18 Headers" and went on to say they fit any B series motor i think.
  10. R

    Wrong CV Joint = broke transmission

    hey just wondering if anyone knows what kind of CV joints my car is supposed to have? I didn't do the swap(previous owner did) but after rebuilding the motor we noticed that the passenger side cv axle had flat roller bearings and the driver side had the normal kind. I did some research...
  11. R

    Air Fuel Ratio Tuning help please

    Hey everyone, I have a b16a obd-0 and I just installed some high compression pistons. Does someone know how I can tune my AF ratio? Is there software I can get for it or will I need to convert to a newer obd?
  12. R

    Head stud kit or Bolts?

    Thanks!! I just bought some ARP's on ebay for 130 Bucks.
  13. R

    Head stud kit or Bolts?

    Do I go arp head studs or do I try and find oem head bolts? So far I haven't been able to locate any oem's. Anyone know where to get them, or should I just go arp? Everyone will probably say don't reuse ur old head bolts...but is it really that risky? I've heard of others doing it and it has...
  14. R

    B16A build

    great looks like I'll have to start a new thread to cause the only responses i've gotten are completly unrelated to my questions :(
  15. R

    Cold starts no more!!

    totally forgot about this thread but to keep my promise i'll let you know how my inline heater worked. IT DIDN'T!! the thermostat didn't let the coolant cycle through my motor:(
  16. R

    PR3 pistons+boost??

    well it wasn't missing. it was completly intact untill it got pulled then i pulled it off of the piston. the rings did a good job of keeping it intact.
  17. R

    B16A build

    i think I'll put in High compression pistons in while I'm at it. Is there anything else that needs to be done at the same time as high compression pistons? and can high compression pistons be paired with high compression valves? and later i will probably want to do my camshafts. do i need to...
  18. R

    B16A build

    here is a picture of the piston. the cylinder still looks good because the piston was completly intact untill we took it out. The ridge between the rings broke off but the cylinder walls and rings didn't give it room to go anywhere.
  19. R

    B16A build

    So I'm not looking to make this a 300 hp race machine. I just use this engine in my acura integra as a daily driver. One piston is broken and she leaks oil everywhere. Any suggestions out there on what pistons to buy? and do I need to do new head bolts too or can I reuse the old ones? The main...
  20. R

    PR3 pistons+boost??

    Okay thanks for your input. I don't doubt that detonation is my problem as i have never got her tuned.
  21. Try your Search on Google

Back
Top