Guys my uncle gave me a wiring harness and say that it was off a prelude motor he had a while back . How can I tell what OBD 1 , 2a or 2b. It has grey plugs. It is only the engine harness no computer harness ends is on it . help guys.
Hey Brian Take a vacation to the Cayman Islands for a week ,man you need abit of relaxation.Sunshine,beaches,caribbean food,etc this might calm you down ,come meet some new chicks man..
I did the conversion from a OBD0 to a OBD1 ECU was smooth and with no idiot light .I got the ecu re-map to handle 18 psi of boost and was running sweet all day.It was also done with the help of this site thanks again to MR Brian. A.K.A. pissedoffsol. :worthy: :worthy: :worthy: :worthy...
I placed the stock chip in and it runs perfect .All i wanted from the shitty ass chip was to gain a bit more rpm 8200 to 9k. now where in Florida can i send the ECU to obtain a bit more RPM???
I am planing to buy a stand alone engine management system in the next 3 months,but for now I bought a turbo chip off ebay a pwo chip .After have the socket install by radio shack tech I placed it in the car and starts it ,after it starts the red light in the ecu stays on and the check engine...
I told the guy from the magazine that i got 99% of help from Hondaswap.com and iwas pissed off not see any of that mention in the magazine.well here is a link where you guys can see what goen on on my little islands. Picture #14 is me and Stephan Papadakis having a drink of Cayman rum...
The Crx has made it to the magazine .
It is in the April issue,it is the yellow front mount that looks like it was painted with a broom and got beat by a VW VR6, but we are having that re run on the 4th of April.anyway the guy that is in the car is my friend from Jamaica that pilots a 10sec 92...
blue/white
red/green
green/yellow
These wires were broken off the harness side which connects to the ecu.
I looked at the plugs A,C,and D and saw that there were bits of wires broken from each plug . This car is a 1996 JDM integra type r with an OBD 2a P73 ECU,
Can someone tells me where...
It would be useful if there was an aera where all the torque specs for the bottom and top end for the B16A motor like the CON ROD and MAIN bolts etc.
Thanks for some useful info........
This is what the car looks like.
https://hondaswap.com/gallery/viewimage...35467e0ea82.jpg
This is the B16A block
https://hondaswap.com/gallery/viewimage...35469f46cf0.jpg
That hondata looks to be really good BUTTT THERE IS NO ONE HERE THAT KNOWS WHAT A HONDATA SYSTEM LOOKS LIKE MUCHLESS TO TRY TUNE IT.We do not have a dyno here. There is a guy Jamaica with a 680BHP civic who has a haltech ,he knows a lot about the haltech and the E-Manage.The hondata would be...
I am building a motor to put in my CRX . This block has Je Pistons Carillo rods re-sleeved ,solid deck arp head studs.
I am now thinking if i should buy the GREDDY E-MANAGE or the high price HALTECH?????? The block remain with its 81mm bore 9:1 CR.i want to get a Z10 block girdle, Does any of...
I took the turbo off to get the manifold welded for cracks,put it on and the car just wont start.I pull the#1-4 plug leads off put a screw driver in try to ground it and start it at the same time but there is no sparks coming .I was told that it might be the igniter that is gone bad .Can this...
I lives in the Caribbean Grand Cayman ,so we all here have to import everything even drinking water from USA or Jamaica know what i mean? I will try to get a phone book, thank you guys.
My turbo T3T4 is leaking oil in the compressor housing.
Where in florida re-builds Garrett turbos????????
Can someone recomend me to a shop in Florida that does these kind of repairs.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.