Search results

  1. Z

    zc swap

    Why is that a stupid question? Some things are a better idea to replace than others. When I did my ZC swap I completely rebuilt the engine, but there are several things that should be replaced while the engine is out. All of the gaskets should be replaced, head, exhaust, intake. Definately the...
  2. Z

    in need of help

    Make sure that you have the correct ECU, and that you have all of your grouds hooked up properly. I had the same problem and it because my ECU didn't have a good enough ground. Once I redid the ground it worked fine.
  3. Z

    cheap engine swap

    You only have to port the header very slightly to fit your ZC head. It's really not that big of a deal. Just set your new exhaust gasket on the header, and bust out the dremel tool, and make the ports match the gasket. As far as the ECU, there are tons of choices. You can use the PM6, PM7, PR4...
  4. Z

    D16A1 in 4th gen will it work?

    Yeah, it will be damn near impossible to mate a A6 block to DOHC head. It's not worth the time and effort. Just get a whole ZC, head and block, this way you'll save yourself a ton of trouble.
  5. Z

    88-91 Main Relay Location

    Hey Jeef, not to be mean or anything, but if you're so happy with your Chevy truck, why are on an all Honda forum? Seems like most people here would really like Honda's. Just curious.
  6. Z

    For Sale: ECU and Resistor Box and new BBK TB

    I have a set of '89 Integra axles, driver and passenger sides. They are both in great shape. I'm asking for $90 shipped. PM me or e-mail me if you are interested.
  7. Z

    For Sale: ECU and Resistor Box and new BBK TB

    Sold the ECU, sorry. I have a fuel injector resistor box for the DPFI to MPFI conversion. Sold. Also a brand new BBK throttle body, never been used in original box. It fits any 92-97 civic including the 2nd gen ZC's. Would like $175 shipped. And I have a '89 Integra Distributor with cap and...
  8. Z

    New BBK Throttle Body

    I have a brand new BBK 62mm throttle body in the original box that I would like to sell. It is brand new and has never been installed. It is for 92-97 Civics. I'm asking $225 shipped or e-mail me with an offer.
  9. Z

    What do you guys (and gals) think of my Civic?

    I will try to get some more engine pics up asap. I love my Accord too! It's actually a blast to drive! Does anybody have some ideas on mods that I need to do or something that I have over looked. Thanks again for the feedback.
  10. Z

    What do you guys (and gals) think of my Civic?

    Hey, thanks for the feedback. And I swear those are only 16's. Mille Miglia Evo5's, and they're not even that heavy thankfully. I don't have a ton of engine pics quite yet, but if you go look at my gallery I have uploaded some pictures from when I was building it up. Also, gotta check out my...
  11. Z

    What do you guys (and gals) think of my Civic?

    It is a 1988 Civic LX. It's got 155,000 miles on it. But pretty much everything that's able to be replaced is new. The engine is a JDM DOHC ZC, the engine only has been run for a couple hours total since I put it in. It's not running right now, I seem to be having some distributor problems. I...
  12. Z

    New Throttle Body For Sale

    Make me an offer if you're interested.
  13. Z

    New Throttle Body For Sale

    I have a BBK Power Plus series Throttle Body. It's brand new in box, 62 mm, for any 92-97 Civic. Asking $250 shipped for it. Here's a picture, email if you want more.
  14. Z

    ZC Tranny Problems

    I have a JDM ZC and I bought the L3 with the limited slip differential and I was told that I need to buy the clutch for an '88 CRX Si and it should fit. Well, I got a Neuspeed N2 clutch for the '88 CRX and, guess what, it doesn't fit. So is the L3 with the LSD have a different shaft size...
  15. Z

    A JDM ZC Swap

    I am doing a DOHC swap into my '88 civic LX, and I am wondering what I have to do with the cam angle sensor that is on the exhaust cam. Is there any specail wiring that I may have to do or do you just not hook it up or what. Any advice would be appreciated. Thanks
  16. Z

    Building a ZC

    Could you please let me know what the specs are. I need to get this engine togetther, I'm getting a little excited to get everything completed. Thanks for your help.
  17. Z

    Building a ZC

    Hey everyone, I'm building up a ZC and I was putting my head on tonight, I put the cams in and then I was putting in the camshaft holder bolts. The things that hold the cams in the head, anyway, I seemed to have torqued them down to hard and two of them snapped. I was just wondering if anybody...
  18. Z

    Zc Head Work

    I have a ZC that I have a fully built bottom end, I haven't done anything to the head yet except for a port and polish. I plan on getting the HKS camshafts but I was wondering if anybody makes valves, springs, retainers or anything fof the ZC, and if not is there something that I can borrow from...
  19. Z

    Proper Break In And Oil

    I am installing a fully built ZC that I am just about finished with, I have the L3 LSD tranny with a Neuspeed clutch, and I was wondering about the best recommended break in process for the new engine and tranny. Also is there a specific oil I should use, a brand that is better than the others...
  20. Z

    Zc Throttle Body

    I am looking for an after market throttle body for my ZC, the intake manifold is the same as the 88-91 CRX Si so I have been looking for one for that car but I can't seem to find anybody who makes throttle bodis for the CRX. If anybody knows of a website the sells them or a brand that makes...
  21. Try your Search on Google

Back
Top