Search results for query: *

ok im pretty sure thats how they hook up D and B series so coolant does go through there..ahhhh ok i was forgettin the one to the back of the block ok thanks alot that is probly y my damn car won't start i appreciate it.

ok i just finished my mini-me setup and tried starting it today, i hooked up all the hoses how i thought they went and here my dumbass had the IAC valve hose hooked up under the TB and a coolant line hooked up to that. i went to start it and i had coolant running out of the IAC valve. can n e...

ok i have an 88 civic hb dx with a mini-me (d16z6) swap and i did the mpfi swap and i have a pg7 ecu. i am waiting on an si distributor before i try to start it, anyways i turned the key to the on pos. just before it starts to see if i was getting fuel and to make sure there was no leaks, when i...

thats the best guide i've seen does any one have a pinout like this for an 88 hb dx to a 91 crx si distributor? thanx

i have the stock ecu but the instructions that i got were for an 88-91 si ecu or and 88-89 integra (pg7) ecu so i bought the integra ecu, i also heard it runs a little rich so hopefully i can tune that down with the fuel pressure regulator, also did u have to advance/retard your timing at all?

also im running the pg7 ecu and i know everyone thinks the p28 is god but i was wondering if it would plug right in and since i did the dx to zc wiring changes would that affect n e thing as far as the pinouts>?

ok i got my D16Z6 head and the vtec solenoid didn't come with the oil pressure sensor so i bought one now heres the question. where do i hook up the wires from the oil pressure sensor, i know the one wire sticking out is for the vtec engagment but there are two prongs on the oil pressure sensor...

yes i have done the dpfi to mpfi already everything is wired up and i thought i could use the dx distributor but word on the web says i can't cause it don't have the crank angle sensor, so i need that to wire it up

anyone know how to swap an 88 dx hatch distributor wireing harness to an si distributor wireing harness for a mini-me swap thanks in advance

ok i have a mini-me swap in an 88 civic hatch dx, and i wanted to add an msd ignition but i seen so many different setups (ignition is the only thing i haven't done yet) i was wondering what i would need for a basic setup like the 5 plug cap with a blaster ss coil or what. could i just use the...

has anybody heard if the aem pulleys are worth gettin, is there a big(noticeable) increase in power any input good or bad please.

ok vtec people where should i connect my vtec solenoid oilpressure line on my mini me setup. should i make a brass "T" right at the line above my oil filter or what is the best way so vtec will actuate? thanks

i haven't been able to find anything on how to wire it for the p28 besides cutting all the connectors and re-wiring the p28 connectors and even then i can't find a p28 with the connectors, also i was goin by a website 4thgenerationcivic.com and i followed that and my wires are all hooked up to...

i am doin a mini me swap and i have everything pretty much done and wired (ecu harness,injectors,resistor,sensors) and i read that i could swap in a crx si or 88' 89' teg ecu, so i got the PG7 (88'89' teg) ecu and i was wonderin if anybody heard of this bad or good. i know its goin to be running...