Search results

  1. N

    Problem with distributor?

    Problem was fixed, it was the coil. The fucked up thing was that my coil looked brand new and was within secondary and primary resistance spec's from Acura's servce manuel. <_<
  2. N

    Map sensor help.

    I have a obd1 wireharness with a 01 LS motor, LS intake manifold and a GSR throttle body swapped into my EG6. I keep getting code 10, 3, and 5. I've tried changing my map sensor, switching ecu's checking my wiring and I still get those codes. I am running a 94-95 p75 auto ecu. Now my...
  3. N

    Problem with distributor?

    Yea to the cover.
  4. N

    Problem with distributor?

    I have a stock 01 LS motor with a obd1 wire harness and a 94-95 LS distributor. When I turn the ignition to position 3 the starter just keeps cranking, but the motor doesen't start. I am not getting any spark from the spark plug, ive tried sticking the sparkplug to the end of the wire and...
  5. N

    Wiring problems, VTEC Oil Pressure Sensor

    b18c1 in a 95 cx hatch I got a diagram the knock sensor (done), the VTEC Solenoid (done) and the VTEC Oil Pressure Sensor?, Blue, D6 (NOT done) On my motor male side, (from the wire harness with the pins) there is a solid blue.. but the side for the ecu harness through the firewall there...
  6. N

    Finding/adding VTEC wires?

    Thanks for the reply!
  7. N

    Finding/adding VTEC wires?

    Thanks for the reply. I will check out the swap sections and hopefully find it.. As for the VSS I know where the plug is, finding the connector to that plug on the tranny is quite difficult... I can't seem to find the wire that connects to it.. Does it run out of the wire harness? I don't...
  8. N

    Finding/adding VTEC wires?

    I just dropped a 2000 GSR b18c1 motor into a 95 civic hatch CX I picked up a p28 sohc vtec ecu chipped. I can't find any online sites that show where the vtec wire is located or if I have to add my own Does anyone know how to get the vtec going with the current swap I have just done? or any...
  9. N

    Finding VTEC wires?

    Sorry I think I posted this in the wrong place.
  10. N

    Finding VTEC wires?

    I just dropped a 2000 GSR motor into a 95 civic hatch CX I picked up a p28 sohc vtec ecu chipped. I can't find any online sites that show where the vtec wire is located or if I have to add my own Does anyone know how to get the vtec going with the current swap I have just done? or any diagrams...
  11. N

    What should I look for??

    I am going to buy a GSR motor b18c1 with like 55k miles from a guy in my area. This is a FULL swap axles linkage mounts ecu etc.. what exactly should I look for while I go down to check out the motor at the warehouse?? What about papers? I think he said there is none. Thanks
  12. N

    What should I look for??

    I am going to buy a GSR motor b18c1 with like 55k miles from a guy in my area. This is a FULL swap axles linkage mounts ecu etc.. what exactly should I look for while I go down to check out the motor at the warehouse?? What about papers? I think he said there is none. Thanks
  13. Try your Search on Google

Back
Top