Search results for query: *

I keep popping fuse 24 under my dash on my EG. Its really starting to piss me off because i have no spark and the fuel pump doesnt prime. Now i know that the PGM-FI relay does that job sends the signel to those and the ecu so the car can start. I ordered the relay so hopefuly thats it. It turns...

Hondas pissing me off Now i have not read any codes because its obd1 and do not know how to do it with out the scanner. now when i turn the car on it has to be jumped because the new battery is died im taking the alternator off today to see if that is it. please let me know if you have any...

ok i jumped it and i turned it on but it keeps dieing like i turn it on get off the clutch give it gas and if i let go of the gas it dies what could it be? im thinking it is the alternator not creating power put it used to turn on perfect before? IDEAS?

Ok they are wired up right then but the cops be hating on me cuz I jump my car and I gas it I love the sound and my neighbors be on my asswhatever so I still havent jumped it yet so I will let u guys know

i replaced the IM gasket and now im trying to figure out the wiring for the fuel injectors i have all yellow/black lines plus red yellow brown grey help me out whats the right order

no engine lights on and i know i should have replaced the im gasket my bad rookie mistake. Now that would cause the car to die?... i thought it would idle funny. im going to take the im off again and replace the gasket. whats the wiring diagram for all the sensors by the im because alot of them...

Pissed off ok i put the USDM Intanke mani and took off the JDM intake mani now i bolted everything down and i think i put everything back how it was. but i have a hose left over from the charcol thing i think. how when i turn the car on nothing comes out of that hose and it doesnt suck or blow...

Update Sorry i havent responded i started a new job and thats been all i have been doing. Now Yesterday i bought a USDM Intake manifold and USDM throttle body for 40 bucks not bad. I had a pain in the ass taking off the old IM and putting on the new IM i put all the sensors on and i i have to...

Im replacing the IM and Throttle with a USDM IM and Throttle because when i put my fingers in the holes that were drilled in the manifold it worked it went down alot and they guy that was working on my car put a piece of cardboard in between the iacv and the intake? idk for what but im having a...

Ok after i get all that fixed i still have one problem that is still pissing me off. THE BATTERY DOESNT HOLD A CHARGE! I have had two new batterys and they both crap out. every time i wanna start the car I have to jump in. What could it be..

I think i put the TPS in fine now what i need to fix it the intake mainfold and find a screw that will fit in the throttle body or just get a new throttle body and new IM

sensors are all plugged in the the power steerring

Well i was recomened JB weld but i want to keep it clean and i want to keep that car for a while, i know it is more expensive to get the whole unit but it will be worth it. and i saw the pic CAFROG and i like how he did that but im looking a USDM intake that already has the MAP SENSOR on top of...

The TPS is new and i have not tested it with a voltimeter and it has 6 point screws but it seemed like it was the map sensor. I dont know you have more experiance in this than i do but when i unscrewed the MAP sensor out of the IM it would want to die

Ok timing fixed dizzy has a new cap and rotor. Now if you look at he picture of the whole engine on the intake manifold, the guy who had this car before me just a been idk dumb he screwed on the MAP sensor in the intake manifold! and there is a screw missing from the throttle body so air is...

put the gasket*

i out the gasket on right lined up and everything OBD1

I checked the iacv not timing and yes i know u need the gun to check timing but i have never performed that.

Ive checked the spark plugs im checking compression the weekend coming up wires are new and that is rigt when i took it off and i did test it before i put it back on. Im going to check the fuel filter tommorrow and checking fuel pressure tommorrow im guessing its going to be timing i dont know...