Search results

  1. D

    Boost Leak Test

    the point of the test, asswipe, is to find the leaks and fix them. so that the turbo spools at the proper RPM
  2. D

    Boost Leak Test

    what? that doesn't help spray soapy water on my charge pipes?
  3. D

    turbo leaking

    that should fix it. i was having the same problem. i was using a -4 feed, and -6 return. i went up to a -10 return and it hasn't leaked since. but tomorrow i'm going to get a restrictor to bring it down to -3 just for good measure.
  4. D

    NEED PART FOR WASTEGATE ASAP

    when i bought my WG used, it didn't come with the ring that seals the valve inside. so i've been using my buddies wastegate until i can find a ring for mine. problem is, i can't find any. does anyone know somewhere i can get this. i need it yesterday. btw, i've emailed tial a couple times...
  5. D

    Boost Leak Test

    i want/need to perform a boost leak test on my car. but i have no idea how to do it. any help?
  6. D

    Oil Residue

    if the seals are blown, shouldn't there be oil in the IC piping coming from the turbo? i haven't checked this yet....
  7. D

    Oil Residue

    here are the pics, i apologize for the resolution, i didn't have time to downsize them
  8. D

    Oil Residue

    i have a -4 feed. and the return line is... ½" maybe. i'm not sure off the top of my head. i will put some pics up later tonight. how would the feed or return line make it leak oil, or whatever it is doing?
  9. D

    Oil Residue

    i have a decent amount of oily residue build up on the inlet to my turbo. is this a sign of failing seals? it also looks that there might be a little bit of leakage between the exhaust and intake side of the turbo. it is a t3t4 Turbonetics. it's supposed to only have about 5k miles on it...
  10. D

    Need help with MSD setup

    how do you run the wires from inside the dist. cap to the blaster coil?
  11. D

    Which size injectors

    so you're saying my DSM 450cc's are only good for around 260hp?
  12. D

    Trim and AR

    can i get a link? cause i've looked and i'm not seeing it anywhere..
  13. D

    cam settings for a turbo car

    i know all engines are different. but in general. when you install a turbo, is it best to set your cam gears to stock time? i will be installing my turbo in about a month. and right now, my intake cam is at +7*, and ex +2* (B16 with CTR's) should i set them both back to 0*? btw....it has...
  14. D

    Trim and AR

    i bought a Turbonetics t3t3 turbo i was told its a .50 trim but can you tell the size of the trim on turbos and what determines the AR of the turbo.... even more..what is the AR? -Robbie
  15. D

    B series dizzy?

    basically i was just wondering what the differences were. inside and out. if there were any electrical differences, or any differences in the flanges. and if a non vtec will work with a vtec, and vice versa...
  16. D

    intercooler piping 2.25" or 2.5"??

    how about a b16 with t3t4 .50 trim 2" to the IC, and 2.5" to the TB. on 7lbs in what ways does the downpipe, and exhaust effect the spool time. ilike to autox so i want a quick spool, but i also want it tohold to 8400. -Robbie
  17. D

    B series dizzy?

    whats the difference between an obd1 vtec distributor, and a non vtec. same question for ob2, ob2b. -Robbie
  18. D

    Apexi Turbo Timer

    can i tap the wire in? or do i need to cut the ignition wires?
  19. D

    new headgasket?

    so can he use a b20 headgasket? he's running a lsvtec btw.
  20. D

    +40 hp

    kid i know had a t3t4 .50 trim on his d16z6, and at 6.5psi he had 178whp on a mustang dyno
  21. Try your Search on Google

Back
Top