Search results

  1. DanTheHondaMan

    JDM B20Vtec Build

    Well guys I picked her up and I blew out 4th gear lol. But I wqs the fastest guy on the street. She is a BLAST to drive. But back to the shop I go smh. I'm going with the syncrotech upgraded gsr turbo gears 1st-4th. They're rated for 500hp and you can replace the outside ring gear teeth and...
  2. DanTheHondaMan

    JDM B20Vtec Build

    Whelp I took her out last night. Beat everyone lol. And then I sheered off 4th gear. 4th gear is non-existent. Back to the drawing board I go. I need better gears. I'm buying syncrotech turbo gears and new carbon coated syncros. I hope that my MFactory LSD is okay.
  3. DanTheHondaMan

    JDM B20Vtec Build

    I'm on the way to pick my hooptie up. We finally got the cooling issues resolved. I'm looking at roll cages. What is a good roll cage that's certified that I should look at that's not going to kill the bank?
  4. DanTheHondaMan

    JDM B20Vtec Build

    We have a racing thermostat I forget the brand off the top of my head. I can't wrap the manifold. It will void the lifetime warranty against cracking with Speed Factory. I can only coat it.
  5. DanTheHondaMan

    JDM B20Vtec Build

    I agree and I will wear one. But I also know how to drive. But anyway. I am having a debate with my speed shop. I wanted to ceramic coat my top mount manifold. They don't want me to do it. Their excuse is that it's stupid and a waste of money. But now we are combating heating issues. Temps...
  6. DanTheHondaMan

    JDM B20Vtec Build

    I'm more interested in going to the drag strip. I'm not sure if I would ever do a road course. I would have to make a lot of changes. I would rather have a street/strip setup. Those are the kind of races I've always watched and been interested in. I just don't think a road course is...
  7. DanTheHondaMan

    JDM B20Vtec Build

    I am very glad I did one. You are so right. And I hope that my build thread helps others. I am glad I am able to contribute to the Honda community. I am still amazed at how much hp these 4 cylinder engines can make. Honda had no clue what they made lol. It made them famous though and propelled...
  8. DanTheHondaMan

    JDM B20Vtec Build

    They get into 6s AWD. I've seen track races and videos. Trans and awd system just has to be built right and reinforced properly. When I go awd I'm turning it up to 1150whp. Maybe might push it to 1200whp/1250whp. My rods are rated for 1300whp. Trust if it's done right it will run and hook. I...
  9. DanTheHondaMan

    JDM B20Vtec Build

    You know I went back to the beginning of my thread and I've got to say. My entire "build" took a shape and form of it's own lol. I have learned so much since then. I am glad I made a thread. And I want to thank everyone for putting up with my stupid questions and for doing your best to help me...
  10. DanTheHondaMan

    JDM B20Vtec Build

    Not a dyno sheet but just as good. It spins in 1-4. It wanted way more but again only way I'm going to be able to go up is if I put it on a hub dyno. This weekend I will post some videos to YouTube and link them. I might be able to add one. It won't let me add the video because its an MP4. I...
  11. DanTheHondaMan

    JDM B20Vtec Build

    and yes. If I increase the power any more I will have to use a hub dyno. That's the only way I would be able to see exactly what it's making.
  12. DanTheHondaMan

    JDM B20Vtec Build

    Thanks guys. This is on E85 -8 feed -6 return with Magnafuel 750 electronic fuel pump gravity fed. Fuel tank it sumped. We can take the car to 1150whp. But I didn't to try and save my built gsr transmission. That's why we stopped to save the trans.
  13. DanTheHondaMan

    JDM B20Vtec Build

    713whp 448wtq. That's where we stopped. Going to dial it in on the street now. I had to rush back to work so I wasn't able to take the dyno sheets with me. But as soon as I get them I will post them. I'm going to have to cut my fenders and put M/Ts on my wheels.
  14. DanTheHondaMan

    JDM B20Vtec Build

    We're at 668whp and 418lbs of torque right now. Every 2-3 runs we have to retighten the straps. It keeps loosening the straps. It's making some serious jam. Can wait to post the sheets. Absolutely crazy!!!
  15. DanTheHondaMan

    JDM B20Vtec Build

    We have to put it on a different dyno. We needed bigger rollers. That seemed to do the trick. I will post sheets later when we're done. Right now its on 26lbs of boost making 630whp.
  16. DanTheHondaMan

    JDM B20Vtec Build

    I posted some videos but they didn't populate. Maybe their too big.
  17. DanTheHondaMan

    JDM B20Vtec Build

  18. DanTheHondaMan

    JDM B20Vtec Build

    Well, We have to try again Monday. We can't get it to hook. No matter what we do. We've tried Spray lube, deflating the tires, inflating the tires, adding weight, dialing in bbg and bbs and nothing seems to help. Maybe have to use something other than R888s I don't know. And if I do that then...
  19. DanTheHondaMan

    JDM B20Vtec Build

    It's on the dyno now. We can't keep it from spinning. This thing is a beast wow!!!
  20. DanTheHondaMan

    JDM B20Vtec Build

    We finally got the skunk2 gaskets. Car is back together and running. But we have to put it back on the dyno to check and make sure everything is good with it and then we're going to put back on the dyno a final time and tune for max power. Right now it's making over 600whp on 12/14 psi. I've...
  21. Try your Search on Google

Back
Top