Search results for query: *

so basically i could go with the type sh since its the same as the base, just change out the tranny and i won't have the ATTS right?

Sassi will you marry me,if indeed that is your official websight :wub:

ok, which motor in this case would be best, i know that the b18 gsr is an acura motor but which cars did the b16 come out of. Again i have a 97 honda civic and am trying to figure out a good swap for speed and somthing that can handle some boost. if you would like to see a picture of what i have...

i'll quote this from www.sportcompactcarweb.com "The only H22 to avoid is from the Type SH Prelude. The brilliant torque distribution system (an electronically controlled box of clutches bolted to the block that Honda calls ATTS) replaces the intermediate shaft and its mounting bracket. The...

Well a little update for you all. It was a h22a4 type sh, therefore it does have the ATTS. I read up on that motor a little more and found out that it is the Worst motor of the h22a to do a swap involving heavy motor upgrading. Just cause evidently if you put to much power to it the ATTS kicks...

hey so couldnt i just pull the atts off, and still run it as a normal h22

I just want a billy bad ass motor in there with an ability to go fast with all the weight out of the car

so when the guy tells me that its a h22 type sh, is that a good one or a bad one

say i have a h22a which would better suit my application for reliability and speed. i have kinda a heavy car 97 honda civic all glassed in stereo four twelves airride and amps and stuff. so which should i go with. :)

Well i am basically making it a show car. I was planning to fill the rear tail lights and then take a strip of LEDs for the rear blinkers and brake lights. The whole car is going to be silver so the LEDs would have a light coating of silver over them, giving it a shaved sleak look. Plus i dont...

Does anyone know of a company or a person that is making the steel cut outs for the tail lights on a honda civic. :shrug2:I am wanting to fill them in but want to weld in metal not fill with bondo or fiberglass that way it's lighter. :)

i have delt with brown bread and dynamat extreme, They are both killer products, i personally use the dynamat extreme, super sticky and thick for extra dampening, plus its foil backed to keep heat in and cold out or vise versa. And the foil won't come off like the cheaper brands. I think that...

when you pull the panels out i would recomend using a two part expanding foam in all the holes that go to the body, the two part doesnt need air to cure, where as just the one part does and will maybe never cure. Also i would use Dynamat extreme over that, then put your panels on. Do the roof...

I dont know alot at the moment which might prove it self. I bought a 97 honda civic with a blown sohc non vtec for $1000 at a repo auction. It is in cherry condition but needs a motor. I found a h22a4 type sh with everything i need for a swap for $850 is this a good swap to make this thing haul...