FL 1990 Honda Civic Si ED GSR swap

We may earn a small commission from affiliate links and paid advertisements. Terms

ThatEFguY

New Member
Well up for sale is my 90 Si GSR swap.The only reason why i'm selling this car is that at this time in my life i need to focuson more important things for now and my future so that i can have nice things later.This car is a great car it has been my daily driver for the past 2 1/2 years now and has been back and forth to sioux falls SD and all over FL i stand behind this car all the way so here is all the good and the bad about her. ALSO I AM THE 3RD OWNER!!!

1990 Honda Civic Si
3 Door Hatch Back
pm if u want the vin
176,764 on the body
unknown on the engine but do know it came out a 94 Integra gsr
ENGINE: B18.C1
Body:
As for the body; it has very little rust; only on the fenders and rear driver-side quarter pannel.
Also has normal dents and dings that come along with a 20 year old stock paint job.
-'88 front bumber
-'90 Integra front lip
-All 4 stock mud flaps, rear ones are brand new from Honda.
-Front and rear Bosch Icon wiper blades.
-brand new Honda badges and SI badge from Honda.
-All around tinted windows
-'VentShade' Window visors.
Interior:
Everything is in good working condition. (ie: Heater, Cig. Lighter, etc.)
-90% stock, very clean, & great conditon.
-All stock SI seats. (Driver side has normal Honda wear and tear; lol)
-Even has rear 'Valence' (hatch cover).
-Rear speaker pod holders, which is very rare.
-Has original stock spare tire, jack, and tools.
-All windows and sunroof open fine, Nothing off track.
-All seatbelts retract fine
-No carpet
-Top liner contains very few holes and tears
-Dash contains very few cracks
-Brand new break and clutch pedal rubber cover.
-Clock has original clock cover
-Grant GT after market steering wheel and hub kit.
-Password JDM red stitched shift boot
-Skunk 2 weighted shift knob
-3 Gage Pod Pillar without gages (I didn't get around to getting the ones i wanted; lol )
Sound System:
-Pioneer head unit w/USB cable Model# DEH-p4000UB
-Pioneer speakers in both front & rear
-Pioneer 1,200 AMP Model# GM-D8400M Class D MONO
-12" Kicker- Solar Baric- Sub and Box

Lighting:
-All Interior lighting works front to rear.
-All exterior lighting works front to rear
-All rear tail lights have Red and Amber LED bulbs
-Front running lights have Amber bulbs
-Low beam headlights are 12,000 K, Xentec HID's.
-High beams- 100 watts, blue bulbs
Battery & Wiring:
-Engine swap wiring, and ECU wiring to OBD-1, done by Hasport,
With 'Street Lights' ECU Conversion Harness.
-Battery is Odyssey; Model # PC680-T, With Password JDM, Carbon Fiber.
-Battery Relocation Kit, w/Gold terminals.
Breaks:
-1990 Integra LS, and front break and rear break conversion
-Rotors have been upgraded to Eagle drilled and slotted rotors
-Goodridge stainless steel breaklines
-Hawk break pads all around
-Brand new rear OEM break calliburs
-Brand new break master cyllinder
-New break booster
Suspension:
- New TRW tie-rod Ends
-new TRW lower ball joints
-new wheel barings
Full energy suspension master Kit
-Energy suspension rear trailer arm bushings.
-Tokico Illumina 5-Way damper adjustable struts
-Skunk 2 Lowering springs- 2.5 front and rear drop
-Skunk 2 LCA, gold.
-Skunk 2 front and rear camber kit
- Stock SI swaybars with energy suspension bushings
Wheels:
-Rota Group Ends, 15' +40 Offset. Front Wrapped in NEXEN - Model # CP641 Size 195-50R15
-Rear wrapped in NITTO, Model # NT450, size 195-50R15 81V
-Rota GT3's Royal Lip Red 16' +40 Offset.
-Front- PRIMEWELL- PZ-900 Size: 205-50 Z R16
Rear- PIRELLI-P6 205-50R16
-Blox Red Racing Lugnuts
Exhaust:
-All ruber hangers
OBX O2 4-wire sensor
-DC Sports 4-2-1 Stainless Steel Header
-Magnaflow High Flow Cat
-Full 2 1/2" Option racing cat back with silencer.

Heating and Cooling:
-Brand New Blower Motor
-brand new heater core
-brand new radiator cap
-Mishimoto black full hose kit
-EBAY slim fan

Drive Train:
-New Integra LS Axels
-1990 Integra LS trani Model # S1-1035019
-ACR Stage 3 clutch and pressure plate
-B&M racing short throw shifter & new shifter bushings
-Reduces throw by 56%
-Hasport shift linkage
Password JDM shift linkage bushing
Engine:
-b18.C1 DOHC V-Tec GSR
-Motor is internally stock and has one bad valve seal on cyllinder #1.
-Other than that, runs great, really great condition. Only smokes when you Really get on it.
-Also, Full rebuild Gasket Kit. (Was planning on rebuilding it, never got around to it).
-Motor -NGK Laser Iridium spark plugs
-Option Racing Red 10MM Spark plug wires
-New VC gasket
-EBAY GSR Intake W/AEM drive flow filter
-ENJO percision pro B series motor mounts
-Upgraded engine ground wires
-New fuel filter
-Also started Password JDM Fender washers and bolts, only have 5- Did not complete.

camspics001.jpg

camspics004.jpg

camspics006.jpg

camspics007.jpg

camspics009.jpg

camspics010.jpg

camspics011.jpg

camspics013.jpg

camspics014.jpg

camspics016.jpg

camspics018.jpg

camspics020.jpg

camspics021.jpg

camspics022.jpg

camspics023.jpg

camspics024.jpg

camspics025.jpg

camspics026.jpg

camspics027.jpg

camspics028.jpg

camspics089.jpg

tom1.jpg

efongt3001.jpg

efongt3002.jpg

A few pics of some of the parts and work
new1209025.jpg

059.jpg

002.jpg

003.jpg

012.jpg

014-1.jpg

015-1.jpg

016-1.jpg

017-1.jpg

018-1.jpg

015.jpg

12345.jpg

123456.jpg

489456.jpg

5644.jpg

9784.jpg

100_3605.jpg

100_3606.jpg

100_3608.jpg

100_3610.jpg

100_3611.jpg

100_3612.jpg

037.jpg

001.jpg

023.jpg


will have some more Interior pics up and some vids of the car soon
$7500 OBO
 
WOW some quality parts (from what little I know from my limited research for my own hatch) Love'n the stickers on the underside of the hood too man. Here's to hoping you get your asking price.
 
That's a very nice looking hatch. I can see that it has a lot of time, money and work put into it. Looks like its been well taken care of:bow:
 
Back
Top