1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1991 acura integra gs motor swap problem...

Discussion in 'HYBRID -> EG-EK / DC' started by 2teg4u, May 16, 2007.

  1. 2teg4u

    2teg4u New Member

    Likes Received:
    May 16, 2007
    The Valley, Oregon
    So, I've had my teg for about 10 months now and the previous owner put a 2000 B16a2 (SiRII) motor in it and seriously screwed me over with the whole thing. So far I've fixed alot of problems, but now I'm stuck on one big problem...

    I cant find any really good pictures of the motor swap in my year of integra, and I need them to figure out where all the vacuum lines go on the intake manifold...

    so far I figured out that he left the old '91 integra intake manifold in there when he should have swapped it out, and so there are a couple vacuum lines that I cant figure out where they go...??! is it because they should have swapped the intake manifold out for a Type R manifold/civic manifold...or is there any way to connect them somewhere?

    my VTEC solenoid has busted 2 times now and there is a MAJOR oil leak coming from it...and I'm thinking that its from the vacuum lines not being connected....??
Draft saved Draft deleted

Share This Page