1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2013 Extreme Speed Integra/Civic Competition

Discussion in 'Racing and Driving Techniques' started by Lietle, May 14, 2013.

  1. Lietle

    Lietle Member

    Messages:
    175
    Likes Received:
    3
    Joined:
    Jan 7, 2011
    Here are some updates ...Extreme Speed Integra/Civic Competition 2013
    Round #1) Buttonwillow Raceway 02/16/2013 (Saturday )
    Round #2) Big Willow 03/23/2013 (Saturday )
    Round #3) Street of Willow 03/31/2013 (Sunday )
    Round #4) Chuckwalla Raceway 05/04/2013 (Saturday )
    Round #5) Big Willow 06/16/2013 (Sunday )
    Round #6) Street of Willow 07/13/2013 (Saturday ) Twilight ( Night Event 4pm-Midnight )
    Round #7 AAA Speedway Roval 09/15/2013 (Sunday )
    Round #8) AAA Speedway Roval 11/23/2013 (Saturday )
    Round #9) Buttonwillow Raceway 12/07/2013 ( Saturday )
    Street Class Requirements:
    140+ tread wear
    Shocks, Springs, One way Adjustable Coilovers, Camber kits and Sway bars allowed (2 sets of spherical or solid metal type bushings/No reservoir type or premium coilovers)
    No splitters, Rear Diffusers or Aero dynamic aides allowed ( OEW allowed )
    Only Bolt-ons allowed – Intake, exhaust and Headers
    Full interior and seats required (Racing seats allowed simi stripped interior to accommodate for roll bar is allowed )
    Carbon/Fiberglass hood only allowed (No hatch/trunk replacements)
    No Ecu tuning allowed, piggy back or otherwise
    No K-swaps Allowed ( B series swap is allowed )
    No Internal Machine work/ No built motors
    Roll Cages allowed (No adjustable point bolt-in cages)
    Modified Class Requirements:
    100+ twr tires only ( DOT R comps for sohc)
    Shocks, Springs, 2 way Adjustable Coilovers, Camber kits and Sway bars allowed (4 sets of spherical or solid metal type bushings/No reservoir type coilovers)
    Intake, Header, Exhaust and staight pipe allowed (Aftermarket IM is allowed )
    Back half interior removal ok, Both front seats installed (Racing seats ok)
    Carbon/Fiberglass Hood hatch , trunk and replacements are allowed
    Ecu tuning allowed
    No K-swaps Allowed
    No Internal Machine work/ No built motors ( after market cams are allowed )
    Roll Cages allowed (No adjustable point bolt-in cages)
    Unlimited Class Requirements:
    DOT R Compounds allowed
    Splitters, Rear Diffusers, Aerodynamic aides allowed
    All Coilovers allowed, any number of Spherical/Solid metal bushings allowed
    Forced induction allowed
    Built motors allowed
    Gutted interior allowed
    Carbon/Fiberglass hood and hatch/trunks allowed
    Ecu tuning allowed
    K-swaps allowed
    Internal machine work/ Built motors allowed
    Roll Cages allowed (No adjustable point bolt-in cages)
     
Verification:
Draft saved Draft deleted

Share This Page