1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

MA 84-87 CRX parts...OEM, aftermarket, TONS of crap

Discussion in 'Parts: For Sale/Trade/Wanted' started by hosmer, Sep 22, 2008.

  1. hosmer

    hosmer I made the millionth post

    1986 CRX Si

    Legit HMO browntop ZC swap...EVERYTHING for your 1g/3g (motor, trans, ECU, shift linkage, axles, Integra spindles w/brakes) - *SOLD*

    also have a D16A1 swap w/out the hubs...motor, tranny, axles, linkage, and ECU - $600
    Motor is extremely clean inside, disassembled because i was going to build it for a turbo setup

    New JUN adjustable cam gears (x2) for a ZC - $300

    New Houseman/Mugen race kit - *PENDING*

    New aftermarket header panel - *SOLD*

    1g Integra rear disc swap (complete axle) - $100

    ***ALL SUSPENSION PARTS HAVE LESS THAN 50 MILES UNLESS NOTED***

    Ground Control rear coilovers - *SOLD*
    Tokico Illuminas..lots of miles but none are blown/bent (missing adjustment knobs) - $225 shipped
    Upgrade Motoring 27.5mm torsion bars - *SOLD*
    1stgencrx adjustable panhard bar - $150 shipped
    Stainless steel brake lines (for 1g Integra brake swap, all 4) - *SOLD*
    Custom 2.25" exhaust w/Magnaflow muffler and test pipe (bolt-in, has flanges in OEM location at cat and uses OEM mounts) - $100

    OEM 85 Si foam spoiler - $75 shipped
    Rust free black sunroof panel - $65
    OEM front fenders, no visible cracks (1 cracked mount on drivers), black primer - $75/ea
    87 Prelude seats (bolt in CRX chassis), good shape no rips but lumbar knob broken - $50
    84-85 Tail lights - $40/pair
    2 rear center garnishes, 1 white letters, 1 red letters - $25/ea *RED LETTERS ONE SOLD*
    86-87 Si door caps (black), no moldings - $65/ea (no cracks/broken pieces)
    84-87 DX/HF gray drivers door cap, no molding - $50 (1 VERY small crack in upper rear corner)
    86/87 Si hatch (black) completely rust free, no spoiler or wiper, glass intact - $60
    Set of red moldings, missing 1 fender piece - $75
    Complete EW Si engine harness - $100
    1 set of mint bluish/gray Si seats - *SOLD*
    1 set of mint black (very dark) Si seats - $75
    85 Si 140mph speedo - *SOLD*
    Bare HF rear axle - $50
    Drivers fender, no cracks or broken mounts, crappy paint (spray painted?) - $60
    OEM torsion tubes w/caps - $50
    OEM torsion bars - $25

    Anything else your looking for, PM or email me:
    hosmerownzyou@yahoo.com


    Pics:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    ZC swap:
    [​IMG]

    D16A1 swap (just mounted the turbo manifold, never ran boost through it):
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    fender with crappy paint, but no broken/cracked mounts
    [​IMG]

    [​IMG]

    drivers fender, 1 cracked mount..
    [​IMG]

    [​IMG]

    passenger fender has no cracked/broken mounts
    [​IMG]

    Prelude seats
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    red moldings...just missing one of the fender pieces
    [​IMG]
  2. cjvictoria

    cjvictoria New Member

    Oooo did i see some skyline wheels in there? Or what!
  3. sevenhillsbilly

    sevenhillsbilly New Member

    bump.... how much for the exhaust shipped to 44131
  4. efhondakid

    efhondakid My name is Byron.

    I would love to have a 1G, especially in such great shape as yours.
  5. hosmer

    hosmer I made the millionth post

    exhaust is too big to ship...its 1 piece from the cat all the way back to the muffler



    thanks, I'd like to have one that I could register/drive on the street and not have to part it out :)
  6. efhondakid

    efhondakid My name is Byron.

    That was kind of what I was trying to get at.
  7. dslayer12

    dslayer12 New Member

    You still have the fenders, front bumper and drivers corner marker and are you selling the header panel as well
    Let me know
    Thanks
  8. kb87crx1

    kb87crx1 New Member

    Hey man I deff want the seats...
  9. alfakarl

    alfakarl New Member

    I'll take the sunroof panel.

    Pop me an email at "rickertracing at bellsouth.net"
  10. 1stGenCRX13

    1stGenCRX13 New Member

    how much for the passenger side corner light?
  11. 87blksi

    87blksi New Member

    interested in the rear disc brakes with axle, do u have the rear calipers too?
  12. 87blksi

    87blksi New Member

    Hey would you still have that VAC box for this brown top, im still runnin off the si box. pls let me kno gotta get this car goin .
  13. hosmer

    hosmer I made the millionth post

    Rear disc swap is complete and amazingly I still have it (this thread is over a year old)

    probably have a vac box outside somewhere but why not just devac it?
    -my zc ran better without it
  14. Mattmahn11

    Mattmahn11 New Member

    How much for the trim

    How much you wanna sell all the red trim for and have it shipped to 29642? Please just e-mail me. Matthew.Hafler@live.com
  15. Mattmahn11

    Mattmahn11 New Member

    My mistake

    I'm a dumb ass, didn't read first.

Share This Page