1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

86 si groundcontrol coilover help

Discussion in 'Civic and CRX - EW' started by domorex86, Mar 21, 2008.

  1. domorex86

    domorex86 New Member

    Messages:
    29
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    Location:
    Phoenix, AZ
    installin the coils now and we noticed the upper pillow mount is bigger than the coil springs. GC says that all material needed was provided. anyone got any info on ths? txt me at 602 318 4305
     
  2. Celerity

    Celerity Well-Known Member

    Messages:
    21,969
    Likes Received:
    146
    Joined:
    Sep 11, 2003
    how much bigger ?
     
  3. domorex86

    domorex86 New Member

    Messages:
    29
    Likes Received:
    0
    Joined:
    Feb 23, 2008
    Location:
    Phoenix, AZ
    well the stock springs are about 5 to 6 inches in diameter, and the GC springs are like 3 to 4 inches in diameter. the concern was the spring and strut pertuding into the trunk area, thus bottoming out the rear end. GC told me that i dont need the pillow that the stock springs have at the top. the silicone pillow provided was meant to be on the bottom where the spring and strut meet. so im confused.
     
Verification:
Draft saved Draft deleted

Share This Page