1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

87 civic OBD0 to OBD1 conversion?

Discussion in 'ECU's, Electronics, and Tuning' started by Jish87, Sep 21, 2012.

  1. Jish87

    Jish87 New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Sep 8, 2012
    Hey guys. I'm rebuilding my 87 civic hatchback and need some help with wiring issues. I just got my b18b1 motor soon to be dropped into the engine bay but I need to figure out how to do an OBD0 to OBD1 conversion for the car itself. I've seen a bunch of stuff about conversion harnesses and other suff like that, but no dice with instructions for a b18b1 motor. Is it the same conversion for all obd1 honda/teg b-series motors? PLEASE HELP!
     
  2. 99sidude

    99sidude Moderator Moderator VIP

    Messages:
    3,707
    Likes Received:
    170
    Joined:
    May 1, 2006
    Location:
    Ohio
    Yes. This the wiring conversion will be basically the same for all b series obd-1 engines with the exception of vtec on some engines and IAB's on gsr engines.
     
  3. Jish87

    Jish87 New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Sep 8, 2012
    Cool thanks man, Still funding this project, but I'm getting there. Thanks again
     
  4. Jish87

    Jish87 New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Sep 8, 2012
    WTB: I need an obd1 b18b1 main and dash harness. These harness' are all i need to complete this project! Please let me know if you have any info on a sale. Thanks - Jish87
     
  5. dilbeckskate

    dilbeckskate infamous

    Messages:
    3,100
    Likes Received:
    190
    Joined:
    Aug 20, 2010
    Location:
    Kennesaw Ga
    I thought 87 si was still pre-obd0
     
Verification:
Draft saved Draft deleted

Share This Page