1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

90 CRX Swap Help

Discussion in 'HYBRID -> ED-EF / DA' started by FKI_Raider, Aug 27, 2007.

  1. FKI_Raider

    FKI_Raider New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 27, 2007
    Hi Guys I have a 90 crx MPFI with a blown motor with no head or intake and my friend gave me a 89 Crx that is DPI i put the motor in and the wiring harrness is diffrent what do i have to do to make this motor run i have no extra cash to spend thx for the help
     
  2. FKI_Raider

    FKI_Raider New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Aug 27, 2007
    So im Puttin a DPI Motor Into A MPFI Car
     
  3. Jeef

    Jeef NO MA'AM Moderator VIP

    Messages:
    7,150
    Likes Received:
    294
    Joined:
    Sep 29, 2002
    Location:
    CT
    I moved this out of the multimedia forum for you. The wiring harness is going to be different. If you want to do this and I don't know why you would you need his old wire harness and ecu. You would then have to figure out the wiring using the mpfi to dpfi swap info but do the wiring backwards. Just save up and get the mpfi intake and distributor it will save you a huge headache.
     
  4. spinninhonda

    spinninhonda New Member

    Messages:
    33
    Likes Received:
    0
    Joined:
    Apr 30, 2007
    MPFI Swap use the mpfi harness, reverse what this tells you to do, and use the dpfi ecu, but sticking with mpfi is MUCH better
     
  5. 1988hondacrxsiR1

    1988hondacrxsiR1 Banned

    Messages:
    230
    Likes Received:
    0
    Joined:
    Sep 10, 2007
    Location:
    Midwest
    MPFI IS the way to go! good luck;)
     
Verification:
Draft saved Draft deleted

Share This Page