1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

91 hatch with prob

Discussion in 'HYBRID -> ED-EF / DA' started by teamrukus69, Jul 28, 2010.

  1. teamrukus69

    teamrukus69 New Member

    Messages:
    28
    Likes Received:
    0
    Joined:
    Jul 28, 2010
    alright i guys i put in a d16z6 in my 91 hatch

    it start to have probs

    the injector is geting the spark plug wet

    when i put the engine in i have to wire the car to multiport so i could run the engine in the car bu recently it started to act up and i dont know why its doing it iv check everything iv been three new injectors just the compression checked the spark checked the wireing

    the nly thing that worrys me is that the injector is supost to run at 12 volts the wire from the resistor box for the injectors is 12 volts but the wire that comes from the ecu is runing at like 10.59 volts its not the computer becase i had another si computer and it still did it
     
  2. teamrukus69

    teamrukus69 New Member

    Messages:
    28
    Likes Received:
    0
    Joined:
    Jul 28, 2010
    k

    can anyone help me with this
     
Verification:
Draft saved Draft deleted

Share This Page