1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

94 si hatch turbo s300hondata lean`s out on decelaration help???????

Discussion in 'ECU's, Electronics, and Tuning' started by sikilla, Apr 23, 2009.

  1. sikilla

    sikilla New Member

    Messages:
    9
    Likes Received:
    0
    Joined:
    Apr 23, 2009
    Location:
    O.R.
    im running b18b1 bored out to 2.0 darton sleaves b16 head ctr/itr cam mix stock intake 800cc inj stock fuel pump hondatas300 for the moment and so on ........i have it running rich to ideal from idle to 12psi and hitting vtec through 1st to 5th and staying idle a/f but when i decelarate/ 0 tps% with brakeing or slowing down it leans out and i have jacked up the fuel tables to where there around 696@1500rpm and dosnt do a god damm thing any help would be nice!!!!!
     
  2. josh_crewdson@y

    josh_crewdson@y New Member

    Messages:
    438
    Likes Received:
    4
    Joined:
    Dec 5, 2007
    Location:
    nova
    Most honda's cut the fuel injectors at 0-tps when there is no engine load (coasting in gear) that could be your problem.
     
Verification:
Draft saved Draft deleted

Share This Page