i bought a 93 integra witha 95 gsr motor swapped in. It had this bouncing tach problem, and i read this tip on gen2integ website and it said to make sure the ignition wire are not lose inside the distributor. So i open the cap, and pinch on the wires like it said on the tip...... but now my car just cranks, it WONT START a all. I cant figure out what I did wrong, or what's wrong in the first place. If anyone had similar problems, or knows what the problem could be.... PLEASE GIVE ME SOME ADVISE !!! THANKS.... you can email me pogi0625@uclink.berkeley.edu