1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

96 project

Discussion in 'HYBRID -> ED-EF / DA' started by DEISUL, Dec 15, 2003.

  1. DEISUL

    DEISUL Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 11, 2003
    I am trying to get the most power out of my stock 96 dx motor so far ive instaled
    a 89 crx intake and exhaust man and air intake. I am now trying to find a v-tech head
    and i would like to know how that will change the compression ratio, i would also
    like to know what the going rate is for a used one.
     
  2. ludegirl

    ludegirl Senior Member

    Messages:
    169
    Likes Received:
    0
    Joined:
    Aug 23, 2003
    Location:
    Southern Cali
    To see how adding a head will change your compression, go to www.c-speedracing.com. The price of a vtec head depends on which one you get. Plus, you should probably get an ecu so you don't fall out of vtec when you shift. My guess is that it will probably cost you about 1,000 - 1,500, but it all depends on how good the head you get is.
     
  3. DEISUL

    DEISUL Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Dec 11, 2003
    thanks for web site ill check it out. I had a frend of a frend offer me a 95 ex
    v-tech head with intake man for only $250 im asuming thats a bargain
     
Verification:
Draft saved Draft deleted

Share This Page