1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

97 JDM H22 type S SH in a 98 accord ex.

Discussion in 'Accord' started by jdmpower22, Jun 4, 2008.

  1. jdmpower22

    jdmpower22 New Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Nov 22, 2007
    just finished my swap. 97 H22 type s with SH trans(atts) into my 98 accord ex. that was a pain in da .... but i did it. ask questions if anyone interested.
     
  2. blue_ricer

    blue_ricer New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jun 4, 2008
    yeah... so how much was it all, u know....with all the hidden costs
     
  3. jdmpower22

    jdmpower22 New Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Nov 22, 2007
    the whole swap from japan with very low mileage cost me 4500. yes i know its alot. but all OBD2 swaps are expensive as hell. plus this one is typeS and type SH trans. i did the swap myself, so didnt have to pay anything for that. well all the fluids n stuff. plus next i have 2 get my exhaust welded cuz the accord header wont bolt up. and get a ECU jumper harness. so all together it was way under 5000. a whole lot of money.
     
  4. BrutalB83

    BrutalB83 Brutal Moderator Moderator VIP

    Messages:
    11,620
    Likes Received:
    302
    Joined:
    Jun 24, 2006
    Location:
    Rochester Hills, MI
    So if you don't have the jumper harness yet then I take it you're driving around with a bunch of error lights on?
     
  5. jdmpower22

    jdmpower22 New Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Nov 22, 2007
    no error lights. .. i redid the whole harness. like on the single cam the crank positioning sensor is near the crank pulley, on H22 its coming out of the distributor plug... so the H22 runs as a single cam. vtec feels weird. lol but ima get it to work right soon. plus i dont drive the car much.
     
Verification:
Draft saved Draft deleted

Share This Page