98 ls motor into a 91 integra

[Langer]

I am putting a 98 ls non-VTEC motor into my 91 integra and would like to use the intake and injectors that came with the new motor. Does anyone have any tips on how to hook up the new sensors/vacume stuff on the new head.

 

[brian11to1]

I sure hope you understand what OBD's are.

your 91 Is the last year Honda/Acura made cars in OBD0 form... yoru 98 LS engien is OBD2... common sense says becuase the numbers following OBD are different that you cannot use the electronics, Intake Manifold yes, injectors no.

Just Wire the engine OBD0 using your stock LS harness, ECU, distributor, injectors & Throttle Body.

pre88-91 = OBD)
92-95 = OBD1
96-Present = OBD2A-B

 

[turboB20hatch]

 

[cycloneb18c3]

I did a b16 out of a 2000 Si,into my 91 teg and I used the stock injectors from the integra. They have the same flow rates(240cc).

 

[brian11to1]

Originally posted by cycloneb18c3@May 7 2004, 03:43 PM
I did a b16 out of a 2000 Si,into my 91 teg and I used the stock injectors from the integra. They have the same flow rates(240cc).

Out of curiousity what does your B16 TEg run in the 1/4?

 

[cycloneb18c3]

it was 14.594 with like a 35 shot nitrous (ls tranny sucks)