1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

'99 B18B with OBD2 harness into EG

Discussion in 'HYBRID -> EG-EK / DC' started by Thoma_s, Jul 30, 2007.

  1. Thoma_s

    Thoma_s New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Sep 6, 2006
    Do I need to rewire some of the wiring for this swap? The harness came from an automatic tranny engine.

    Any help would be greatly appreciated.
     
  2. welfare

    welfare Ancient Member

    Messages:
    1,120
    Likes Received:
    9
    Joined:
    Apr 19, 2004
    Location:
    New York
    umm, No, you will jsut have extra plugs where the auto trans was hooked up.
    if you have a VX or CX eg or an early Dx you will have to modify/add o2 sensor wires. there are writeups in the refrence secton about vx and cx wiring.
    make sure you get an integra ls obd1 ecu to run the engine. pr4 or whatever
     
  3. Thoma_s

    Thoma_s New Member

    Messages:
    20
    Likes Received:
    0
    Joined:
    Sep 6, 2006

    thanks buddy, this answers my curiousity about the extra plugs from the harness.
     
Verification:
Draft saved Draft deleted

Share This Page